The adoption of the electronic controlled steering systems with new technologies has been extended in recent years. They have interactions with other complex vehicle subsystems and it is a hard task for the vehicle developer to find the best solution from huge number of the combination of parameter settings with track tests.In order to improve the efficiency of the steering system development, the authors had developed a steering bench test method for steering system using a Hardware-In-the-Loop Simulation (HILS). In the steering HILS system, vehicle dynamics simulation and the tie rod axial force calculation are required at the same time in the real-time simulation environment. The accuracy of the tie rod axial force calculation is one of the key factors to reproduce the vehicle driving condition. But the calculation cannot be realized by a commercial software for the vehicle dynamics simulation. A multibody kinematics model of strut suspension was developed for the tie rod axial force calculation.In this study, a new kinematics model of a double wishbone suspension system was developed for the tie rod axial force calculation. The evaluation of developed kinematics model was carried out by comparing the results of a kinematic analysis and the tie rod axial force calculation to those of ADAMS. Then the evaluation of the reproducibility of the vehicle driving condition in the steering HILS system was carried out by comparing the calculated vehicle behavior, measured tie rod axial force and measured steering torque to those of a track test using a prototype vehicle.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of Hardware-In-the-Loop Simulation System for Steering Evaluation Using Multibody Kinematic Analysis


    Weitere Titelangaben:

    Sae International Journal of Passenger Cars. Mechanical Systems
    Sae Int. J. Passeng. Cars - Mech. Syst


    Beteiligte:

    Kongress:

    SAE 2014 World Congress & Exhibition ; 2014



    Erscheinungsdatum :

    2014-04-01


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Subjective and Objective Steering Feel Evaluation of Compact SUV Electric Power Steering System Using Hardware in the Loop Simulation

    Anthonysamy, Baskar / TK, Sreeraj / TK, Sreedeep et al. | British Library Conference Proceedings | 2021


    Subjective and Objective Steering Feel Evaluation of Compact SUV Electric Power Steering System Using Hardware in the Loop Simulation

    N, BALARAMAKRISHNA / Anthonysamy, Baskar / NAGARAJAN, NAGAPRAKASH et al. | SAE Technical Papers | 2021


    Using High Fidelity Multibody Vehicle Models in Hardware in the Loop Simulations

    Prescott, W. / Furman, M. / Yamamoto, K. et al. | British Library Conference Proceedings | 2012


    Development of Steering Hardware-in-the-loop(HIL) Simulator

    Segawa, M. | British Library Conference Proceedings | 2006


    Development of a hardware in the loop simulation system for electric power steering in vehicles

    Lee, M. H. / Lee, H. M. / Lee, K. S. et al. | British Library Online Contents | 2011