Bake-hardening steels used for exposed auto-body panels provide low yield strengths before forming, and increased strength and dent resistance after the forming and paint-baking processes. Room temperature aging can alter the sheet properties before forming, after forming, or after baking. Knowledge of the evolution of mechanical properties is important, and the effects of room temperature and simulated room temperature aging (at 50°C and 100°C) on the yielding behavior and the bake hardening response of two different bake-hardening steel grades were studied. The steels included a low strength ultra-low carbon steel and a dual-phase steel with higher strength and greater bake-hardening index. Neither steel exhibited a substantial response to aging prior to tensile pre-straining, although both steels exhibited strength increases after either aging or baking following straining. The total strengthening increment was essentially independent of aging history for both steels, and followed t2/3 kinetics, with an apparent activation energy somewhat greater than the activation energy for carbon diffusion in ferrite.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Effects of Room Temperature Aging on Subsequent Bake-Hardening of Automotive Sheet Steels


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Matlock, D. K. (Autor:in) / Speer, J. G. (Autor:in) / Wüebbels, T. (Autor:in)

    Kongress:

    SAE 2002 World Congress & Exhibition ; 2002



    Erscheinungsdatum :

    2002-03-04




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    The effects of room temperature aging on subsequent bake- hardening of automotive sheet steels

    Wuebbels,T. / Matlock,D.K. / Speer,J.G. et al. | Kraftfahrwesen | 2002


    The effect of room temperature aging on subsequent bake-hardening of automotive sheet steels

    Wüebbels, T. / Matlock, D.K. / Speer, J.G. | Tema Archiv | 2002


    2002-01-0041 The Effects of Room Temperature Aging on Subsequent Bake-Hardening of Automotive Sheet Steels

    Wuebbels, T. / Matlock, D. K. / Speer, J. G. et al. | British Library Conference Proceedings | 2002


    Dent-resistant bake-hardening steels for automotive outer-body applications

    Pradhan,R. / Bethlehem Steel,US | Kraftfahrwesen | 1991


    Dent-resistant bake-hardening steels for automotive outer-body applications

    Pradhan,R. / Bethlehem Steel,US | Kraftfahrwesen | 1990