Lithium-ion (Li-ion) batteries are considered as one of the solutions for electric vehicles (EV) in the automotive industry due to their lightweight and high energy density. Their mechanical performance is of great importance for EV crashworthiness design. In this study, quasi-static and dynamic indentation tests were conducted on commercially available vehicle battery pouch cells to investigate their structural integrity. Three indenters, namely, a 19.1 mm (3/4 in.) diameter flat end (FE), a 25.4 mm (1 in.) diameter hemispherical (LH), and a 12.7 mm (1/2 in.) diameter hemispherical (SH), were used to investigate the punch force-deflection responses of the cells. Loading velocity varied in the range of 0.06 mm/s to 3 m/s to test the strain rate effect. Simplified closed-form analysis solutions were developed to predict the pouch cell force-deflection response by considering the effect of compression, tension, and shear of the battery component materials. Good agreement was obtained between the model predictions and test data. Besides the cell level tests, an additional indentation test using a rigid wedge was carried out on a multicell battery module to assess module level damage under large plastic deformation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Crushing Behavior of Vehicle Battery Pouch Cell and Module: A Combined Experimental and Theoretical Study


    Weitere Titelangaben:

    Sae Int. J. Mater. Manf
    Sae International Journal of Materials and Manufacturing


    Beteiligte:
    Gbaguidi, Audrey (Autor:in) / Sypeck, David (Autor:in) / Zhu, Feng (Autor:in) / Lei, Jianyin (Autor:in) / Currier, Patrick (Autor:in) / Du, Xianping (Autor:in)

    Kongress:

    WCX World Congress Experience ; 2018



    Erscheinungsdatum :

    2018-04-03


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Pouch frame with integral circuitry for battery module

    MALCOLM ROBERT G / NIEDZWIECKI MARK / WYATT PERRY M et al. | Europäisches Patentamt | 2017

    Freier Zugriff

    Pouch battery cell assembly for traction battery

    ROBERT BRIAN JOSEPH / DREWS ANDREW ROBERT / KARULKAR MOHAN | Europäisches Patentamt | 2018

    Freier Zugriff

    Pouch type secondary battery and battery module including the same

    Europäisches Patentamt | 2016

    Freier Zugriff

    Pouch Battery Cell Assembly for Traction Battery

    ROBERT BRIAN JOSEPH / DREWS ANDREW ROBERT / KARULKAR MOHAN | Europäisches Patentamt | 2018

    Freier Zugriff

    POUCH TYPE SECONDARY BATTERY AND BATTERY MODULE INCLUDING THE SAME

    YOO IN SUN / JUNG HO SUB / JEONG WON HEE et al. | Europäisches Patentamt | 2015

    Freier Zugriff