This SAE Standard specifies a method for measuring the deflection of friction materials, noise insulators, and disc brake pad assemblies to be used in road vehicles with a Gross Vehicle Weight Rating below 4336 kg. This part of the SAE J3079 includes the test for deflection and creep at various pressures under ambient temperature conditions. This SAE test method differs from SAE J2468 and ISO 6310 in the preload and maximum load applied to the test sample when deflection is measured. It also introduces additional measurements such as for deflection offset, hysteresis, and creep. This standard addresses brake pad deflection characteristics similar to SAE J2468 with the following refinements: The brake system pressure range is from 30 kPa to 13000 kPa Test results are summarized both graphically and in tabular format Includes guidelines to improve the accuracy and repeatability Includes a description of a test procedure for noise insulators The deflection characteristics of friction materials, noise insulators, and disc brake pad assemblies are commonly used in caliper and brake system design as well as for quality control during manufacturing. Pad deflection influences many design characteristics including brake fluid consumption, caliper stiffness and mass, caliper piston retraction, and park brake adjustment. The deflection also influences performance characteristics including brake pedal travel, brake drag, park brake performance, and the propensity of the brake system to generate noise and roughness.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Low-preload Deflection Measurement for Brake Pads, Noise Shims, and Brake Pad Assemblies


    Erscheinungsdatum :

    2016-07-14



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Anti-Noise Brake Pads Shims: T-pull Test

    SAE Technical Papers | 2009


    Vehicle Brake Noise Shims: A Tutorial for Continuous Product Improvements

    Dickinson, Richard C. | SAE Technical Papers | 2008


    Vehicle Brake Noise Shims: A Tutorial for Continuous Product Improvements

    Dickinson, R.C. / Society of Automotive Engineers | British Library Conference Proceedings | 2008



    Influence of Pads and Brake Disc wear on Brake Squeal Noise

    Ferreto, Cláudio Junior / Silva, Felipe Dornellas / Gutiérrez, Juan Carlos Horta et al. | SAE Technical Papers | 2020