Engine knock is one of the most limiting factors for modern Spark-Ignition (SI) engines to achieve high efficiency targets. The stochastic nature of knock in SI units hinders the predictive capability of RANS knock models, which are based on ensemble averaged quantities.To this aim, a knock model grounded in statistics was recently developed in the RANS formalism. The model is able to infer a presumed log-normal distribution of knocking cycles from a single RANS simulation by means of transport equations for variances and turbulence-derived probability density functions (PDFs) for physical quantities. As a main advantage, the model is able to estimate the earliest knock severity experienced when moving the operating condition into the knocking regime.In this paper, improvements are introduced in the model, which is then applied to simulate the knock signature of a single-cylinder 400cm3 direct-injection SI unit with optical access; the engine is operated with two spark timings, under knock-safe and knocking conditions respectively. The statistical prediction of knock resulting from the presented knock model is compared to the experimental evidence for both investigated conditions.The agreement between the predicted and the measured knock distributions validates the proposed knock model. Finally, limitations and some unprecedented possibilities given by the model are critically discussed, with particular emphasis on the meaning of RANS knock prediction.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a RANS-Based Knock Model to Infer the Knock Probability in a Research Spark-Ignition Engine


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017


    Erschienen in:

    Erscheinungsdatum :

    2017-03-28


    Format / Umfang :

    18 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Knock in Spark Ignition Engines

    By, A. / Kempinski, B. / Rife, J. M. | SAE Technical Papers | 1981


    Characterization of Knock in a Spark-Ignition Engine

    Chun,K.M. / Heywood,J.B. / Massachusetts Inst.of Technology,Cambridge,US | Kraftfahrwesen | 1989


    Knock in Spark Ignition Engines

    By,A. / Kempinski,B. / Rife,J.M. et al. | Kraftfahrwesen | 1981


    Characterization of Knock in a Spark-Ignition Engine

    Heywood, John B. / Chun, Kwang Min | SAE Technical Papers | 1989


    Modeling autoignition and engine knock under spark ignition conditions

    Eckert,P. / Kong,S.C. / Reitz,R.D. et al. | Kraftfahrwesen | 2003