The high speed continuous braking distance assessment is the worst condition for thermal fades. This study was conducted to investigate the relationship between fade characteristic and friction materials & brake fluid amount for improving braking distance. So, we used the dynamometer to measure the friction coefficient, braking distance and required brake fluid amount. Through the measurements, the research was carried out as follows. First of all, we studied the influence of friction coefficient about different shapes (chamfer shape, area of the friction material, number of slots) on the same friction material. Secondly, we knew the effects of braking distance by the shape of the friction material. Through these two studies, the shape of the friction material favorable to the fade characteristics was derived. Finally, we measured the amount of required brake fluid in caliper after 10 consecutive braking cycles through Dynamometer. And then, we measured the amount of compression deformation and uneven wear of the friction material. It was found that the above two factors cause the increase the amount of required brake fluid. Through this study, in order to have strength for the fade characteristic, it is required that continuous management of the friction material and shape of brake pad. This is because the friction coefficient and the high temperature compression deformation of the friction material are determined by its material. Also, it is necessary to robust design the caliper for reducing for uneven wear about the brake pad.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Study on the Optimum Reduction of Required Brake Fluid Level for Improvement of the High Speed Continuous Brake Distance


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    So, Eue-sub (Autor:in) / Kim, Junggyu (Autor:in) / Kim, Kwang Yun (Autor:in)

    Kongress:

    Brake Colloquium & Exhibition - 37th Annual ; 2019



    Erscheinungsdatum :

    2019-09-15




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A Study on the Optimum Reduction of Required Brake Fluid Level for Improvement of the High Speed Continuous Brake Distance

    Kim, Junggyu / Kim, Kwang Yun / So, Eue-sub | British Library Conference Proceedings | 2019


    The high-speed brake

    Engineering Index Backfile | 1896


    The high-speed brake

    Parke, R.A. | Engineering Index Backfile | 1896


    BRAKE DISTANCE CONTROL DEVICE

    NAKAMURA AKIO | Europäisches Patentamt | 2019

    Freier Zugriff

    BRAKE DISTANCE SHORTENING APPARATUS

    FUKUDA HITOSHI | Europäisches Patentamt | 2017

    Freier Zugriff