This paper introduces different modeling approaches of crankshafts, compares the refinement levels and discusses the difference between the results of the crankshaft durability calculation methodologies. A V6 crankshaft is considered for the comparison of the refinement levels depending on the deviation between the signals such as main bearing forces and deflection angle. Although a good correlation is observed between the results in low speed range, the deviation is evident through the mid to high speed ranges. The deviation amplitude differs depending on the signal being observed and model being used.An inline 4 crankshaft is considered for the comparison of the durability results. The analysis results show that the durability potential is underestimated with a classical crankshaft calculation approach which leads to a limitation of maximum speed of 5500 rpm. Especially at elevated speeds the designated hybrid calculation methodology exhibits a more realistic prediction concerning the local safety factor distribution. In this way crankshaft potentials can be exploited and speeds up to 7000 rpm are allowed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Borderline Design of Crankshafts Based on Hybrid Simulation Technology


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Maassen, Franz (Autor:in) / Cevik, M. Cagri (Autor:in) / Rebbert, Martin (Autor:in) / Pischinger, Stefan (Autor:in)

    Kongress:

    Powertrains, Fuels and Lubricants Meeting ; 2009



    Erscheinungsdatum :

    2009-06-15




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Borderline design of crankshafts based on hybrid simulation technology

    Cevik,M.C. / Pischinger,S. / Rebbert,M. et al. | Kraftfahrwesen | 2009


    Crankshafts

    Engineering Index Backfile | 1933


    Crankshafts

    Wilson, R.E. | Engineering Index Backfile | 1942


    Lightweight crankshafts

    Druschitz,A.P. / Fitzgerald,D.C. / Hoegfeld,I. et al. | Kraftfahrwesen | 2006