The stringent emission regulations coupled with tighter CO2 targets demand extreme optimization of the diesel engines. In this context, it is important to minimize the cylinder bore distortions in cold and hot conditions. The cold bore distortion is primarily due to the assembly forces applied by the cylinder head bolts whereas the hot distortion is a resultant of local metal temperatures and structural rigidity. The present work describes the extreme optimization techniques used to reduce the bore distortion of a modern high power-density (60 kW / lit) diesel engine, Moreover, the benefits of reducing the bore distortion are quantified in terms of cylinder system friction, blowby rate, oil consumption (OC) and ash loading rate of the diesel particulate filter (DPF).An optimized torque plate honing is used to reduce the bore distortion in cold conditions. However, an extreme optimization of the cylinder bore structure and water jacket design was needed to control the hot bore distortion. With the reduced bore distortion, the engine could be optimized to have a reduced tangential force. The cumulative tangential force of all the piston rings could be reduced from 37 N to 23.5 N which could result in a significant reduction in the cylinder system friction. Moreover, the engine level measurements with and without the torque plate honing confirm that a significant reduction in blowby rate (approximately 20 %) and oil consumption (approximately 25 %) could be achieved with the torque plate honing. The results were found to be consistent with the vehicle level results of the oil consumption (g/km).Furthermore, the reduction in oil consumption could benefit the ash loading behaviour of the DPF. With the low bore distortion (LBD) engine, the ash loading rate of the DPF could be reduced significantly which is extremely important to have consistently higher regeneration intervals throughout the life of the vehicle. Thus, the development approach to have low bore distortion has resulted in multiple benefits and hence it is found to be useful in developing diesel engines with compliance to future regulations.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a Modern Diesel Engine with Ultra-Low Bore Distortion to Reduce Friction, Blowby, Oil Consumption and DPF Ash Loading


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2020



    Erscheinungsdatum :

    2020-09-25




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Ring Dynamics in a Diesel Engine and Its Effect on Oil Consumption and Blowby

    Truscott,R. / Reid,T. / Ruddy,B. et al. | Kraftfahrwesen | 1983


    Power Part Parameters Affecting Lube Oil Consumption and Blowby in Small Bore, High Speed Diesels

    Weinberger, Carl S. / Shepler, Paul R. | SAE Technical Papers | 1969


    Oil consumption and blowby of truck Diesel Engines - tests bench results

    Elleimann,J. / Roehrle,M.D. / Schelling,H. et al. | Kraftfahrwesen | 1981


    Oil Consumption and Blowby of Truck Diesel Engines-Test Bench Results

    Schelling, Herbert / Ellermann, Jürgen / Röhrle, Manfred D. | SAE Technical Papers | 1981


    The influence of compression ring clearances on the blowby in a diesel engine

    Koszalka,G. / Niewczas,A. / Tech.Univ.of Lublin.PL | Kraftfahrwesen | 2006