For lean or dilute, boosted gasoline compression-ignition engines operating in a low-temperature combustion mode, creating a partially stratified fuel charge mixture prior to auto-ignition can be beneficial for reducing the heat-release rate (HRR) and the corresponding maximum rate of pressure rise. As a result, partial fuel stratification (PFS) can be used to increase load and/or efficiency without knock (i.e. without excessive ringing). In this work, a double direct-injection (D-DI) strategy is investigated for which the majority of the fuel is injected early in the intake stroke to create a relatively well-mixed background mixture, and the remaining fuel is injected in the latter part of the compression stroke to produce greater fuel stratification prior auto-ignition. Experiments were performed in a 1-liter single-cylinder engine modified for low-temperature gasoline combustion (LTGC) research. The main objective of this study is to quantify the effects on the HRR and efficiency gains possible by applying this D-DI fueling technique to a near-perfectly homogeneous mixture and to a moderately stratified mixture (all the fuel injected early in the intake stroke). For the D-DI fueling technique, the timing of the late injection and the fuel-fraction split between the early and late injections were independently varied. This study demonstrates that the D-DI fueling strategy is effective at reducing the heat release rate, which allows CA50 to be significantly advanced without knock. Moreover, compared to fully-premixed fueling, with PFS gain in efficiency of as much as 3%-units were measured while maintaining very low NOx and soot emissions. Nonetheless, with the D-DI fueling, efficiency improvement is less than expected from the allowable CA50 advancement. Additional detailed analyses show that this is due to a combination of reduced combustion efficiency and increased heat transfer as stratification is increased beyond a certain level using this fuel D-DI fueling strategy and injector hardware. Overall, this study provides key understanding about the practical use of multiple direct injections to exploit PFS for intake-boosted operation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Efficiency Improvement of Boosted Low-Temperature Gasoline Combustion Engines (LTGC) Using a Double Direct-Injection Strategy


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Ji, Chunsheng (Autor:in) / Dernotte, Jeremie (Autor:in) / Dec, John (Autor:in)

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017



    Erscheinungsdatum :

    2017-03-28




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Spray-Guided Direct Injection for Boosted Gasoline Engines

    King, Jason / Feulner, Peter | Springer Verlag | 2013


    Technology Assessment of Boosted Direct Injection Stratified Charge Gasoline Engines

    Kolmanovsky, Ilya / Cook, Jeff / Sun, Jing et al. | SAE Technical Papers | 2000


    Mixture Stratification for CA50 Control of LTGC Engines with Reactivity-Enhanced and Non-Additized Gasoline

    Lopez Pintor, Dario / Gentz, Gerald / Dec, John | SAE Technical Papers | 2021


    Direct injection gasoline engines - combustion and design

    Geiger,J. / Grigo,M. / Lang,O. et al. | Kraftfahrwesen | 1999


    Direct Injection Gasoline Engines - Combustion and Design

    Geiger, José / Grigo, Michael / Lang, Oliver et al. | SAE Technical Papers | 1999