Lead-acid batteries have dominated the automotive conventional electric system, particularly in the functions of starting (S), lighting (L) and ignition (I) for decades. However, the low energy-to-weight ratio and the low energy-to-volume ratio makes the lead-acid SLI battery relatively heavy, large, and shallow Depth of Discharge (DOD). This could be improved by replacing the lead-acid battery by the lithium-ion polymer battery. The lithium-ion polymer battery can provide the same power with lightweight, compact volume, and deep DOD for engine idle elimination using start-stop function that is a basic feature in electric-drive vehicles. This paper presents the modeling and validation of a lithium-ion battery for SLI application. A lithium-metal-oxide based cell with 3.6 nominal voltage and 20Ah capacity is used in the study. A simulation model of lithium-ion polymer battery pack (14.4V, 80Ah) with battery management system is built in the MATLAB/Simulink environment. The experimental tests are performed in battery module-level, a four series-connected cells (14.4V, 20Ah), under various charging and discharging currents in a temperature chamber. The experimental data is used to calibrate the model parameters for validation. The simulation results show a 9% or less discrepancy in all continuous and pulse charge/discharge conditions. The developed simulation model could provide design guidelines for lithium-ion polymer battery applications in 12 voltage SLI, start-stop system, and 48 voltage mild hybrid electric vehicle.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modeling and Validation of Lithium-Ion Polymer SLI Battery


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Lai, Ming-Chia (Autor:in) / Liao, Y. Gene (Autor:in) / Liu, Yiqun (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2019



    Erscheinungsdatum :

    2019-04-02




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Battery modeling for lithium polymer battery management system

    Indra, Winneryanto Dwi / Majid, Imaduddin A. / Sya'bani, Faisal et al. | IEEE | 2013


    Modeling and Validation of Lithium-Ion Automotive Battery Packs

    Lee, S. / Lee, B. / McDonald, J. et al. | British Library Conference Proceedings | 2013


    Modeling and Validation of Lithium-Ion Automotive Battery Packs

    Lee, Byungho / Nam, Edward / McDonald, Joseph et al. | SAE Technical Papers | 2013



    Modeling and Validation of 48V Mild Hybrid Lithium-Ion Battery Pack

    Cherry, Jeff / McDonald, Joseph / Olechiw, Michael et al. | SAE Technical Papers | 2018