Natural gas offers the potential to reduce greenhouse gas emissions from heavy-duty on-road transportation. One of the challenges facing natural gas as a fuel is that its composition can vary significantly between different fuel suppliers and geographical regions. In this work, the impact of fuel composition variations on a heavy-duty, direct injection of natural gas engine with diesel pilot ignition is evaluated. This combustion process results in a predominantly non-premixed gaseous fuel combustion event; as a result, end-gas autoignition (knock) is not a concern. Changes in the fuel composition do still impact the combustion, both through the changes in the chemical kinetics of the reactions and due to changes in the density of the fuel. Increasing concentrations of heavier hydrocarbons, such as ethane or propane, in the fuel lead to higher fuel densities and hence greater fuel mass being injected for a given injection duration. This results in a combustion that has similar peak heat-release rates but longer combustion duration. There is little impact on peak cylinder pressures or the timing of the start of the combustion. The main effect on engine emissions is a substantial increase in PM emissions, due to the greater concentrations of C2-and higher species in the fuel. Various on-board sensors can be used to monitor the engine and correct fueling to avoid engine damage. In this work, a sensing system including bearing-cap mounted accelerometers is used to detect changes in the combustion event and adjust the fueling as needed to maintain engine torque over significant fuel composition variations. These results demonstrate a potential technique for engine protection and control that can accommodate wide variations in natural gas composition.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Impacts and Mitigation of Varying Fuel Composition in a Natural Gas Heavy-Duty Engine


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017


    Erschienen in:

    Erscheinungsdatum :

    2017-03-28


    Format / Umfang :

    12 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Heavy duty flexible fuel engine

    Miller,R.L. / DelVecchio,K.A. / Chan,A.K. et al. | Kraftfahrwesen | 1995


    Heavy Duty Flexible Fuel Engine

    Miller, R. L. / DelVecchio, K. A. / Chan, A. K. F. et al. | British Library Conference Proceedings | 1995


    Heavy duty flexible fuel engine feasibility

    Richards,B.G. / Chan,A.K.F. / Caterpillar Tractor,US | Kraftfahrwesen | 1993


    Oxygenated Fuel Composition Impact on Heavy-Duty Diesel Engine Emissions

    Boot, Michael D. / Frijters, Peter J.M. / Baert, Rik S.G. et al. | SAE Technical Papers | 2007


    Oxygenated fuel composition impact on heavy-duty diesel engine emissions

    Boot,M.D. / Frijters,P.J. / Klein-Douwel,R.J. et al. | Kraftfahrwesen | 2007