Abstract To enhance the performance of humanoids, mobile robots and manipulators, motors are desired to be able to provide high torque without relying on gears. To be able to drive joint motors with high output, the current value that can flow needs to be increased. However, the heat generated by the high current drive can cause motor failure, so cooling is necessary. We used thermoelectric cooling as a new cooling method for high-power drive of motors. By developing a thermoelectric cooling module for motors and conducting experiments, the effectiveness of thermoelectric cooling was verified. In the experiment, the motor was kept running at a high current for a long period of time. The comparison with the motor alone or with water cooling showed that the thermoelectric cooling module can significantly reduce the rise in temperature of the motor. Furthermore, based on the results of the voltage value measurements, it was expected that the increase in coil resistance due to higher coil temperatures would be kept lower than in other cases. The effect on rise in internal temperature was also considered to be greater than that of water cooling. These experimental results show that the thermoelectric cooling module can be used to increase the upper limit of the current at which the motor is continuously driven.
Investigation into Increasing the Motor-Drivable Current Using a Thermoelectric Cooling Module
Power Electronics and Drives ; 7 , 1
2022
Aufsatz (Zeitschrift)
Englisch
BKL: | 53.35 Stromrichter, Transformatoren / 53.33$jElektrische Maschinen und Antriebe / 53.33 Elektrische Maschinen und Antriebe / 53.35$jStromrichter$jTransformatoren |
Method for operating electrically drivable motor vehicle and electrically drivable motor vehicle
Europäisches Patentamt | 2023
|Motor vehicle body for electrically drivable motor vehicle
Europäisches Patentamt | 2023
|Hydraulic system, electrically drivable drive train of motor vehicle, and hybrid module
Europäisches Patentamt | 2022
|