Abstract A marine gas turbine enclosure must be designed to prevent overheating of the electrical and engine control components as well as diluting potential fuel leaks. In order to achieve an optimal enclosure design, a numerical study of the ventilation-ejection cooling mechanism of a gas turbine enclosure is carried out in this paper. The evaluation index of the ejection cooling performance is first proposed and the algorithm of numerical simulation is verified. On this basis, orthogonal combinations of structural parameters are carried out for the expansion angle α of the lobed nozzle and the spacing S between the outlet plane of the lobed nozzle and the inlet plane of the mixing tube. The flow and the temperature distribution inside the enclosure are analysed under different operating conditions. The results show that the influence of the lobed nozzle expansion angle α and the spacing S on the performance is not a single-valued function but the two influencing factors are mutually constrained and influenced by each other. For any spacing, the combined coefficient is optimal for the expansion angle α = 30°. When the expansion angle α = 45° and the spacing S = 100 mm, the combined coefficient and the temperature distribution inside the enclosure are optimal at the same time.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical Study of the Ejection Cooling Mechanism of Ventilation for a Marine Gas Turbine Enclosure


    Beteiligte:
    Shi, Hong (Autor:in) / Zhang, Qianwei (Autor:in) / Liu, Meinan (Autor:in) / Yang, Kaijie (Autor:in) / Yuan, Jie (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2022




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    50.92 Meerestechnik / 55.40 Schiffstechnik, Schiffbau



    Numerical Study of the Ejection Cooling Mechanism of Ventilation for a Marine Gas Turbine Enclosure

    Shi Hong / Zhang Qianwei / Liu Meinan et al. | DOAJ | 2022

    Freier Zugriff

    Turbine Blade Surface Phantom Cooling from Upstream Nozzle Trailing-Edge Ejection

    Li, Shiou-Jiuan / Yang, Shang-Feng / Han, Je-Chin et al. | AIAA | 2015


    High-thrust mechanism for ejection device, ejection system and ejection method

    GUO JIUMING / MA XIAOXIAO / LI YANMING et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    Ventilation system for an automotive fuel cell stack enclosure

    CUSUMANO THOMAS JOSEPH / PITTMAN DEBORAH DIANE / ALESSI JR DONALD PAUL | Europäisches Patentamt | 2018

    Freier Zugriff