Abstract A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for an amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned in-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speeds for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Comparative study on the performance of pod type waterjet by experiment and computation


    Beteiligte:
    Kim, Moon-Chan (Autor:in) / Park, Warn-Gyu (Autor:in) / Chun, Ho-Hwan (Autor:in) / Jung, Un-Hwa (Autor:in)


    Erscheinungsdatum :

    2010




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    55.40 Schiffstechnik, Schiffbau / 50.92 Meerestechnik, Meerestechnik / 55.40 Schiffstechnik, Schiffbau, Schiffstechnik, Schiffbau / 50.92 Meerestechnik



    Comparative study on the performance of Pod type waterjet by experiment and computation

    Moon-Chan Kim / Warn-Gyu Park / Ho-Hwan Chun et al. | DOAJ | 2010

    Freier Zugriff

    AN EXPERIMENTAL STUDY ON ABRASIVE WATERJET MACHINING THROUGH DESIGN OF EXPERIMENT

    Aydin, G. / Karakurt, I. / Aydiner, K. | British Library Conference Proceedings | 2010


    De Waterjet

    Online Contents | 1998



    Waterjet application

    Online Contents | 1996