Abstract Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure


    Beteiligte:
    Chen, Lian-meng (Autor:in) / Gao, Wei-feng (Autor:in) / Hu, Dong (Autor:in) / Zhou, Yi-yi (Autor:in) / Zhang, Fu-bo (Autor:in) / Dong, Shi-lin (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2018




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    BKL:    55.80 Verkehrswesen, Transportwesen: Allgemeines, Verkehrswesen, Transportwesen: Allgemeines / 74.75 Verkehrsplanung, Verkehrspolitik, Verkehrsplanung, Verkehrspolitik / 55.80 Verkehrswesen, Transportwesen: Allgemeines / 56.24 Straßenbau, Straßenbau / 56.24 Straßenbau / 74.75 Verkehrsplanung, Verkehrspolitik



    Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

    Chen, Lian-meng / Gao, Wei-feng / Hu, Dong et al. | Springer Verlag | 2018


    Identification and Adjustment of the Pretension Deviation in Cable-Strut Tensile Structures

    Chen, Lianmeng / Jiang, Zhichao / Gao, Weifeng et al. | Springer Verlag | 2020


    CRANE STRUT, FOLDING METHOD OF CRANE STRUT, AND CONSTRUCTION METHOD OF CRANE STRUT

    KOIZUMI YUKIO / MATSUO YOHEI / INADA KEIKO et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    ELECTRICAL TELESCOPIC STRUT CONSTRUCTION

    MACIAS CUBEIRO ROSA / CRESPO CHICO JOSE LUIS / MORANTE LOPEZ ESTEBAN et al. | Europäisches Patentamt | 2019

    Freier Zugriff

    Electrical telescopic strut construction

    MACIAS CUBEIRO ROSA / CRESPO CHICO JOSE LUIS / MORANTE LOPEZ ESTEBAN et al. | Europäisches Patentamt | 2020

    Freier Zugriff