Abstract The aim of the present study is to propose a procedure for identifying dynamic strain hardening parameters using the virtual fields method (VFM) so as to provide more accurate hardening properties at high strain rates for automotive crash analysis simulations. In order to validate the procedure, a proper elasto-plastic constitutive model was adopted and simulated measurements were obtained using a finite element (FE) analysis program. The same identification procedure as that which will be implemented in the experiments was applied. The VFM was used as an inverse analytical tool to retrieve the constitutive parameters. Since precise measurement of the applied load is not an easy task at high strain rates due to the inertial effect, the identification was carried out using the acceleration fields without utilizing load information. A sensitivity study was conducted to assess the effect of several experimental conditions on the identification. Then, the identified parameters using the VFM were compared with the target ones, which were fed into the FE simulations. Very promising results were obtained using the VFM.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Determination of dynamic strain hardening parameters using the virtual fields method


    Beteiligte:
    Kim, J. H. (Autor:in) / Lee, G. A. (Autor:in) / Lee, M. G. (Autor:in)


    Erscheinungsdatum :

    2015




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    55.20$jStraßenfahrzeugtechnik / 55.20 Straßenfahrzeugtechnik



    Determination of dynamic strain hardening parameters using the virtual fields method

    Kim, J. H. / Lee, G. A. / Lee, M. G. | British Library Online Contents | 2015


    Determination of dynamic strain hardening parameters using the virtual fields method

    Kim, J. H. / Lee, G. A. / Lee, M. G. | Springer Verlag | 2015


    Optimal Seat Dynamic Parameters Determination for Minimizing Virtual Driver's Fatigue

    Yang, James / Li, Ning / Xu, Peijun et al. | SAE Technical Papers | 2014


    An appropriate method for the dynamic response of strain-hardening clamped beams

    Youngdahl,C.K. / Argonne National Lab.,Reactor Engng.Div.,US | Kraftfahrwesen | 1994


    Optimal Seat Dynamic Parameters Determination for Minimizing Virtual Driver's Fatigue

    Kumbhar, P. / Li, N. / Xu, P. et al. | British Library Conference Proceedings | 2014