Abstract The quality of an injection molded part is largely affected by the mold cooling. Consequently, this makes it necessary to optimize the mold cooling circuit when designing the part but prior to designing the mold. Various approaches of optimizing the mold cooling circuit have been proposed previously. In this work, optimization of the mold cooling circuit was automated by a commercial process integration and design optimization tool called Process Integration, Automation and Optimization (PIAnO), which is often used for large automotive parts such as bumpers and instrument panels. The cooling channels and baffle tubes were located on the offset profile equidistant from the part surface. The locations of the cooling channels and the baffle tubes were automatically generated and input into the mold cooling computer-aided engineering program, Autodesk Moldflow Insight 2010. The objective function was the deviation of the mold surface temperature from a given design temperature. Design variables in the optimization were the depths, distances and diameters of the cooling channels and the baffle tubes. For a more practical analysis, the pressure drop and temperature drop were considered the limited values. Optimization was performed using the progressive quadratic response surface method. The optimization resulted in a more uniform temperature distribution when compared to the initial design, and utilizing the proposed optimization method, a satisfactory solution could be made at a lower cost.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design optimization of an injection mold for minimizing temperature deviation


    Beteiligte:
    Choi, J. -H. (Autor:in) / Choi, S. -H. (Autor:in) / Park, D. (Autor:in) / Park, C. -H. (Autor:in) / Rhee, B. -O. (Autor:in) / Choi, D. -H. (Autor:in)


    Erscheinungsdatum :

    2012




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    55.20$jStraßenfahrzeugtechnik / 55.20 Straßenfahrzeugtechnik



    Design optimization of an injection mold for minimizing temperature deviation

    Choi, J. -H. / Choi, S. -H. / Park, D. et al. | Springer Verlag | 2012


    Design optimization of an injection mold for minimizing temperature deviation

    Choi, J. H. / Choi, S. H. / Park, D. et al. | British Library Online Contents | 2012



    Minimizing Filter Volume by Design Optimization

    Briot, Anthony / Carranza, Francisco / Girot, Patrick et al. | SAE Technical Papers | 2007


    Minimizing filter volume by design optimization

    Briot,A. / Carranza,F. / Girot,P. et al. | Kraftfahrwesen | 2007