Abstract In new slim torque converters, lock-up clutches are used to provide high fuel efficiency at low speed. However, the slimness of the converters causes difficulty in heat dissipation, which may damage the friction material and shorten its life span. A cooling hole in the lock-up piston reduces the heat but also reduces the torque because oil flows through the hole due to the pressure difference between the two faces of the piston. In the early stages of the development of this type of torque converter, designers must consider the minimum flow rate required to cool the friction material and the minimum torque capacity required to transmit the engine torque. This research explored two methods of estimating these parameters. In the first method, an estimation equation was derived by combining the response surface method with physical properties such as the centrifugal force, a sudden expansion, a sudden contraction, and the steady flow energy equation. The second method involved the use of an artificial neural network. The feasibility of the estimates based on statistics and on the artificial neural network were confirmed in the design stage by comparing experimental and estimated data. An estimation program was created using the C#.Net language and has been used for actual torque converter designs by the Korea Powertrain Company.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Capacity estimation of torque converters with piston holes using the response surface method and an artificial neural network


    Beteiligte:
    Chun, D. M. (Autor:in) / Lee, J. C. (Autor:in) / Yeo, J. C. (Autor:in) / Ahn, S. H. (Autor:in) / Hong, S. S. (Autor:in) / Jang, J. D. (Autor:in)


    Erscheinungsdatum :

    2011




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Klassifikation :

    BKL:    55.20$jStraßenfahrzeugtechnik / 55.20 Straßenfahrzeugtechnik




    Capacity estimation of torque converters with piston holes using the response surface method and an artificial neural network

    Chun, D. M. / Lee, J. C. / Yeo, J. C. et al. | British Library Online Contents | 2011


    SEALED PISTON APPARATUS AND RELATED SYSTEMS FOR USE WITH VEHICLE TORQUE CONVERTERS

    VELAYUDHAM VIJAYAKUMAR / LEE SUNGCHUL / JEYABALAN SUBRAMANIAN et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    Torque Converters?

    MILLER, RAYMOND J. | SAE Technical Papers | 1946


    Surface Flows Inside Automotive Torque Converters

    Lee, J.-S. / Ay, H. / Yang, W.-J. et al. | British Library Conference Proceedings | 1994