A local, intermittency-function-based transition model was developed for the prediction of laminar-turbulent transitional flows with freestream turbulence intensity Tu at low (Tu < 1%), moderate (1% < Tu < 3%), and high Tu > 3% levels, and roughness effects in a broad range of industrial applications such as turbine and helicopter rotor blades, and in nature. There are many mechanisms (natural or bypass) that lead to transition. Surface roughness due to harsh working conditions could have great influence on transition. Accurately predicting both the onset location and length of transition has been persistently difficult. The current model is coupled with the k–ω Reynolds-averaged Navier–Stokes (RANS) model, that can be used for general computational fluid dynamics (CFD) purpose. It was validated on the ERCOFTAC experimental zero-pressure-gradient smooth flat plate boundary layer with both low and high leading-edge freestream turbulence intensities. Skin friction profiles agree well with the experimental data. The model was then tested on ERCOFTAC experimental flat plate boundary layer with favorable/adverse pressure gradients cases, periodic wakes, and flows over Stripf's turbine blades with roughness from hydraulically smooth to fully rough. The predicted skin friction and heat transfer properties by the current model agree well with the published experimental and numerical data.
Modeling of Laminar-Turbulent Transition in Boundary Layers and Rough Turbine Blades
Journal of turbomachinery ; 139 , 11
2017
Aufsatz (Zeitschrift)
Englisch
ENGINEERING NOTE - Transition from Laminar to Turbulent Boundary Layers
Online Contents | 2012
|Studies of Laminar-Turbulent Transition in Hypersonic Boundary Layers at Onera
British Library Conference Proceedings | 1999
|Laminar-Turbulent Transition in Free Shear Layers
AIAA | 1981
|