Gear shifting simulations using the multibody system approach and the finite-element method are standard in the development of transmissions. However, the corresponding models are typically large due to the complex geometries and numerous contacts, which causes long calculation times. The present work sets itself apart from these detailed shifting simulations by proposing a much simpler but powerful synchronisation model which can be computed in real-time while it is still more realistic than a pure rigid multibody model. Therefore, the model is even used as part of a Hardware-in-the-Loop (HiL) test rig. The proposed real-time capable synchronization model combines the rigid multibody system approach with a multiscale simulation approach. The multibody system approach is suitable for the description of the large motions. The multiscale simulation approach is using also the finite-element method suitable for the analysis of the contact processes. An efficient contact search for the claws of a car transmission synchronisation unit is described in detail which shortens the required calculation time of the model considerably. To further shorten the calculation time, the use of a complex pre-synchronisation model with a nonlinear contour is presented. The model has to provide realistic results with the time-step size of the HiL test rig. To reach this specification, a particularly adapted multirate method for the synchronisation model is shown. Measured results of test rigs of the real-time capable synchronisation model are verified on plausibility. The simulation model is then also used in the HiL test rig for a transmission control unit.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Simulation model of a gear synchronisation unit for application in a real-time HiL environment


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2017




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    BKL:    55.20 / 50.32 / 50.32 Dynamik, Schwingungslehre / 55.20 Straßenfahrzeugtechnik
    Lokalklassifikation TIB:    535/7020



    Simulation model of a gear synchronisation unit for application in a real-time HiL environment

    Kirchner, Markus / Eberhard, Peter | Taylor & Francis Verlag | 2017


    A Physically Representative Aircraft Landing Gear Model for Real-Time Simulation

    York, B. / Alaverdi, O. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 1996



    Clock Synchronisation and Time Dissemination

    Huber, F. / Messerschmid, E. | British Library Online Contents | 1996


    Clock Synchronisation and Time Dissemination

    Huber, F. / Messerschmid, E. / European Space Agency | British Library Conference Proceedings | 1996