The growing pressure to reduce fuel consumption and cut emissions has triggered renewed interest in contra-rotating open rotor (CROR) technologies. One of their potential issues is self-excited or forced vibration of the unducted, light-weight, highly swept blades. This paper presents a numerical study into the flutter behavior of a CROR rig at take-off conditions. The study presented in this paper aimed to validate the numerical approach and provide insights into the flutter mechanisms of the open rotor under investigation. For the initial validation, pressure profiles and thrust coefficients from steady-state mixing plane calculations were compared against rig measurements. A full domain unsteady analysis predicted front rotor instability at low advance ratios. Flutter occurred in the first torsional mode in 0 and 1 nodal diameter (ND) which agreed with experimental observations. Subsequent unsteady computations focused on the isolated front rotor and first torsional mode. The flow field and aerodynamic damping over a range of advance ratios were studied. It was found that minimum aerodynamic damping occurred at low advance ratios when the flow was highly three-dimensional on the suction side. A correlation between the quasi-steady loading on the blade and aeroelastic stability was made and related to the numerical results. The effects of variations in frequency were then investigated by linking local aerodynamic damping to the unsteady pressure on the blade surface.
Investigation of Flutter Mechanisms of a Contra-Rotating Open Rotor
Journal of turbomachinery ; 138 , 5
2016
Aufsatz (Zeitschrift)
Englisch
CONTRA-ROTATING OPEN ROTOR DISTRIBUTED PROPULSION SYSTEM
Europäisches Patentamt | 2015
|Contra-Rotating Open Rotor Tone Noise Prediction
AIAA | 2014
|Contra-rotating open rotor distributed propulsion system
Europäisches Patentamt | 2017
|Contra-rotating open rotor distributed propulsion system
Europäisches Patentamt | 2016
|Experimental and Numerical Investigation of a Contra Rotating Open-Rotor Flowfield
Online Contents | 2012
|