The results presented at the Second AIAA High-Lift Prediction Workshop, using the flow-solver Edge, are summarized for the DLR, German Aerospace Center F11 model. A comparative study of the results, using three turbulence models, is carried out, including the Spalart-Allmaras model, an explicit algebraic Reynolds-stress model, and a curvature correction to the explicit algebraic Reynolds-stress model. The comparisons include a grid-convergence study on a simplified model without slat- and flap-track fairings, and polar calculations including the fairings. The grid-convergence study shows relatively small differences due to different grid resolution and turbulence models, but the differences are larger than those obtained in the first workshop for the NASA trap wing. The prediction has fairly large discrepancies from experimental measurements at low Reynolds numbers for which the computations were carried out assuming fully turbulent flow. The explicit algebraic Reynolds-stress model (with or without curvature correction) tends to exaggerate flow separation and to underpredict the lift, as compared to the experiment. The Spalart-Allmaras model, on the other hand, overpredicts the lift at higher incidences. At the higher Reynolds number, the predictions agree well with the experimental measurements for different turbulence models. The curvature correction to the explicit algebraic Reynolds-stress model has an insignificant effect on the computed results in comparison with the explicit algebraic Reynolds-stress-model predictions. Presented as Paper 2014-0750 at the 52nd Aerospace Sciences Meeting, National Harbor, MD, 13-17 January 2014


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Results from the Second AIAA CFD High-Lift Prediction Workshop Using Edge


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2015




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :

    Klassifikation :

    BKL:    55.50 Luftfahrzeugtechnik / 55.50
    Lokalklassifikation TIB:    770/7040




    Results from the Second AIAA CFD High-Lift Prediction Workshop Using Edge

    Eliasson, P. / Peng, S.-H. | British Library Conference Proceedings | 2015


    NSU3D Results for the Second AIAA High-Lift Prediction Workshop

    Mavriplis, Dimitri / Long, Michael / Lake, Troy et al. | AIAA | 2015


    NSU3D Results for the Second AIAA High-Lift Prediction Workshop

    Mavriplis, Dimitri | Online Contents | 2015


    NSU3D Results for the Second AIAA High-Lift Prediction Workshop

    Mavriplis, D. / Long, M. / Lake, T. et al. | British Library Conference Proceedings | 2015