The primary aim of this study is to investigate current issues of combustion in high-speed direct-injection diesel engines in detail by optical diagnostics. Both fuel and engine design are considered. Recently, measurements of engine-out emissions demonstrated that approximately soot-free combustion can be achieved using a newly designed two-component fuel named BLT. It was composed of 70% butyl levulinate and 30% n-tetradecane (by volume). In this work, the underlying mechanism is clarified by in-cylinder visualization of OH* radicals and soot. In particular, it turns out that in-cylinder soot formation is avoided almost completely, that is, the soot oxidation process is much less important. This is basically achieved by both the oxygen content (about 21%) and the low cetane number (approximately 33) of BLT. The latter leads to enhanced pre-mixing of fuel and air. Consequently, soot formation can be greatly reduced because it depends on the air-fuel ratio of the mixture shortly before high-temperature combustion. The influence of in-cylinder air swirl on combustion and soot formation is also studied for both BLT and conventional diesel fuel, respectively, using the same optical diagnostic. The measurements show that the combustion zone strongly depends on the local gas-flow velocity for diesel fuel. Soot formation decreases with increasing swirl because of enhanced air entrainment and pre-mixing of fuel and air. In addition, the results indicate that soot oxidation is improved under high-swirl conditions for diesel fuel. In contrast, the influence of swirl on the combustion of BLT is overall found to be weak, suggesting that swirl could be reduced in future high-speed direct-injection engines for BLT-like fuels.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Optical investigation of fuel and in-cylinder air-swirl effects in a high-speed direct-injection engine




    Erscheinungsdatum :

    2014




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    BKL:    52.35 Kolbenkraftmaschinen / 52.35




    Sabre: A Direct Injection 3-Cylinder Engine with Close-Spaced Direct Injection, Swirl-Enhanced Combustion and Complementary Technologies

    Turner, J. W. G. / Coltman, D. / Curtis, R. et al. | British Library Conference Proceedings | 2008


    Fuel Breakup Near Exit of High-Pressure Swirl Injector for Gasoline Direct Injection Engine

    Kawahara, N. / Tomita, E. / Kasahara, D. et al. | British Library Conference Proceedings | 2004


    Fuel breakup near nozzle exit of high-pressure swirl injector for gasoline direct injection engine

    Kawahara,N. / Tomita,E. / Kasahara,D. et al. | Kraftfahrwesen | 2004


    Fuel Breakup Near Nozzle Exit of High-Pressure Swirl Injector for Gasoline Direct Injection Engine

    Kasahara, Daisuke / Tomita, Eiji / Sumida, Mamoru et al. | SAE Technical Papers | 2004