Colloid microthrusters have been operated successfully in flight, providing drag-free and precision control for spacecraft that can be used for future applications such as gravity wave and exoplanet observatories. The Space Technology 7 Disturbance Reduction System (ST7- DRS) technology demonstration payload included eight Busek Colloid Micro-Newton Thrusters (CMNTs) as part of the Laser Interferometer Space Antenna (LISA) Pathfinder mission that launched in December of 2015. The CMNTs provided full attitude and precision drag-free control of the spacecraft with <10 nm/√Hz stability along the most sensitive axis during commissioning, nominal, and extended mission phases through April of 2017. Performance requirements (≤0.1 μN/√Hz) were met and models were validated based on on- orbit measurements of test mass motion and actuation during the 60-day nominal and 30-day extended missions. In 2018, the European Space Agency (ESA) selected LISA to be the agency’s next “large-class” mission, currently in Phase A, with a launch scheduled for 2034 and a 12.5-year duration, including the transfer (1.5 years), commissioning (1 year), nominal (4 or 6 years), and extended (6 or 4 years) phases of the mission, which sets the lifetime and consumables requirement. NASA is considering a significant contribution of hardware to the ESA-led mission, potentially including colloid microthrusters. In preparation, NASA is developing five technologies to TRL 5 and 6, including the colloid microthrusters, to be ready for infusion into LISA by the mission adoption review (MAR), currently scheduled for 2024. While ST7-DRS effectively brought the CMNTs to TRL 7, additional lower-TRL flow control components must be developed for full redundancy, reducing the system-level TRL back to 4. Key to the future of the colloid microthruster technology will be to use lessons learned and keep as much of the heritage from the ST7 design as possible while updating the system to support redundancy and lifetime requirements of a flagship-class mission. This paper describes the technology plan and progress to reach TRL 6 by the MAR, focusing on near- term plans to reach TRL 5 by the end of March 2022 for the LISA Colloid Microthrusters (CMTs). Work includes requirements development and sizing studies, breadboard and brassboard hardware developments at Busek, including relevant lifetime and environment testing, and lifetime modeling, verification and validation efforts at JPL, UCLA, and UCI.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Progress on LISA Colloid Microthruster Technology Development



    Erscheinungsdatum :

    2020-08-23


    Medientyp :

    Preprint


    Format :

    Keine Angabe


    Sprache :

    Englisch



    LISA colloid microthruster technology development plan and progress

    Wirz, Richard E. / Gamero-Castano, Manuel / Demmons, Nathaniel R. et al. | NTRS | 2019


    Incorporating Lessons Learned into LISA Colloid Microthruster Technology Development

    Ziemer, John K. / Marrese-Reading, Colleen / Arestie, Steven M. et al. | AIAA | 2019


    INCORPORATING LESSONS LEARNED INTO LISA COLLOID MICROTHRUSTER TECHNOLOGY DEVELOPMENT

    Ziemer, J. K. / Marrese-Reading, C. M. / Arestie, S. M. et al. | TIBKAT | 2019


    PROGRESS ON DEVELOPING LISA MICROTHRUSTER TECHNOLOGY

    Ziemer, John K. / Marrese-Reading, Colleen / Arestie, Steven et al. | TIBKAT | 2020


    Progress on Developing LISA Microthruster Technology

    Ziemer, John K. / Marrese-Reading, Colleen / Arestie, Steven et al. | AIAA | 2020