This project developed a higher-fidelity model of a recently envisioned small spacecraft propulsion system for precision pointing and proximity control. Plasmonic force propulsion harnesses solar light focused onto plasmon reactive subwavelength nanostructures to accelerate and expel nanoparticle propellant via strong optical forces. The goal of the project was to show that plasmonic space propulsion can provide the level of proximity and attitude control envisioned for future NASA nano/picosatellite missions, a level that is better than state-of-the-art approaches. We achieved this goal by showing that plasmonic force thrusters are feasible for a range of advanced mission concepts requiring swarm formations in a deep space environment. We performed three case studies that evaluated the performance of the plasmonic force propulsion thruster in a deep space, microsatellite swarm formation. These case studies assumed the propulsion system could generate thrust at the level predicted from our Phase 1 study (1.6 μN). Through these cases we were able to analyze the concept within a mission specific context through detailed orbital dynamics calculations. Results indicate that, with the Phase 1 estimated thrust level, the approach is promising for providing attitude control to swarm formation spacecraft. Further, we achieved goals related to technology development. Specifically, we experimentally demonstrated nanoparticle acceleration due to plasmonic forces with asymmetric nanostructures excited by focused laser light. Additionally, we investigated the thrust sensitivity and nanoparticle propellant injection dependencies upon thermal effects. As a result of our study, plasmonic force propulsion is at an early TRL 3. Active research and design has been conducted analytically and in the laboratory. Furthermore, practical applications such as the three case studies have been identified for the scientific basic principles that were observed. Future efforts related to fundamental understanding of these techniques should focus on 1) developing a standalone array of asymmetric nanostructures that can effectively interact with a stream or reservoir of particles or 2) experimentally evaluate a dielectrophoretic injector for nanoparticle propellant. The main limitation discovered about plasmonic propulsion regards performance estimates significantly below the Phase 1 estimations. Specifically, original assumptions in the Phase 1 project (notably, a linear array of asymmetric nanostructures) is not a viable approach to achieving significant acceleration, high exhaust velocity, of nanoparticles. More specifically, we assumed in Phase 1 that nanoparticles would be accelerated in series by a long linear array of asymmetric nanostructures. That is, the acceleration of the nanoparticle would build and increase with the kick received by each subsequent nanostructure. This is fundamentally flawed. The potential profile of a single nanostructure is such that it prohibits this phenomenon. The potential energy associated with the plasmon-generated dielectrophoretic force is a potential well, which is good for trapping nanoparticles, but cannot provide significant acceleration of particles to expel them out and away from the nanostructure. Further, a nanoparticle expelled from the first nanostructure would need to overcome the potential barrier for entry into the next nanostructure accelerating stage. Fundamentally, this effect means that a linear array of nanostructures is not a viable accelerating structure. Correspondingly then, acceleration can, or should, only be provided by one nanostructure, and the net acceleration and thrust force of a single nanostructure is small (~cm/s exhaust velocities, sub-nN level thrust vs. the 100’s m/s, μN originally envisioned). While our experiments demonstrated acceleration and manipulation of a nanoparticle using laser light in aqueous environment, the achievable energy and momentum addition to the nanoparticle from a single nanostructure stage is too low for useful propulsion. In terms of thrust prediction, the estimated thrust of 1.6 μN in Phase 1 is reduced to a few nN of thrust with this new insight and understanding of the concept. This thrust level is too small to achieve attitude control of swarms as originally envisioned.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Experimental Demonstration and System Analysis for Plasmonic Force Propulsion


    Beteiligte:
    Rovery, Joshua L. (Autor:in) / Gao, Jie (Autor:in) / Pernicka, Henry (Autor:in) / Yang, Xiaodong (Autor:in)

    Erscheinungsdatum :

    2019-09-27


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Experimental Demonstration and System Analysis for Plasmonic Force Propulsion

    J. L. Rovery / J. Gao / H. Pernicka et al. | NTIS | 2019


    Plasmonic Force Space Propulsion

    Rovey, Joshua L. / Friz, Paul D. / Hu, Changyu et al. | AIAA | 2015


    Plasmonic Force Space Propulsion

    Rovey, Joshua L | Online Contents | 2015


    Plasmonic Force Propulsion Revolutionizes Nano/Picosatellite Capability

    Rovey, Joshua L. / Yang, Xiaodong / Friz, Paul D. et al. | NTRS | 2014


    Fabrication of Asymmetric Nanostructures for Plasmonic Force Propulsion

    Maser, Jaykob N. / Rovey, Joshua / Yang, Xiaodong | AIAA | 2016