Presented is an explanation of the use of the Initial Criticality Assessment (ICA) technique, a triage process for prioritizing required Failure Modes and Effects Analysis (FMEAs), for the European Service Module's main propulsion system's hot-fire test bed at White Sands New Mexico. Rather than instinctively performing many FMEAs of subsystems, or one large system level FMEA where every subcomponent is analyzed, the ICA guided an informed analysis of only the hardware that had a large impact to hazards. The low criticality hardware was documented via the ICA and no FMEA was performed; the work could then focus on the high criticality hardware. Thus a savings of Program resources was achieved. The experiences gained in creating these ICAs for this international collaborative project confirmed that the need for continuous communication across the technical teams is one of the greatest areas of emphasis. The European Space Agency (ESA) is developing the European Service Module (ESM), with its primary contractor, Airbus Defence and Space in Germany, for delivery to the National Aeronautics and Space Administration (NASA). The module will be equipped with a total of 21 engines to support NASA’s Orion spacecraft: one U.S. Space Shuttle Orbital Maneuvering System-Engine (OMS-E), eight auxiliary thrusters and 12 smaller RCS (Reaction Control System) thrusters. The main ESM propulsion system, used for large translational maneuvers, consists of one OMS-E... To qualify the design of the ESM propulsion subsystem (PSS) an all-steel Propulsion Qualification Module (PQM) structure is used to test the propulsion systems on Orion, including “hot firing” of the OMS engine, thrusters, and RCS. The PQM has been developed as a hot-fire test bed to be tested at the NASA White Sands Test Facility (WSTF). One of the objectives of the testing is to assure that the OMS-E can be safely operated with the PQM. Testing will also demonstrate that the PQM can set the proper upstream pressures and temperatures for the OMS-E to operate nominally given the PQM has never been tested in hot-fire operation with OMS-E before. In order to safely conduct the test campaign, hardware such as the engine subassembly, fluid feed lines, valves, electrical power lines, instrumentation, stiff links, installation Ground Support Equipment (GSE), and diffuser [whose objectives are to collect the exhaust of the OMS-E to actively cool down the exhaust gases, reduce thermal exchanges, and create a vacuum at OMS-E level before igniting], had to be analyzed for any hazards and failure modes.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Initial Criticality Assessments to Guide FMEAs on Rocket Engine Hot Fire Testing


    Beteiligte:
    Fernandez, Rene (Autor:in) / Riddlebaugh, Jeff (Autor:in) / Martinez, Hugo (Autor:in) / Berry, Kevin (Autor:in)

    Kongress:

    Annual Reliability and Maintainability Symposium (RAMS 2018) ; 2018 ; Reno, NV, United States


    Erscheinungsdatum :

    2018-01-22


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Deriving Failure Rates in a Hierarchy of FMEAs

    Joyce, John / Abbas, Samer | SAE Technical Papers | 2017


    Combustion flame guide for rocket engine testing equipment

    Europäisches Patentamt | 2017

    Freier Zugriff

    COMBUSTION FLAME GUIDE FOR ROCKET ENGINE TESTING EQUIPMENT

    KIM SUNG HYUK / JO NAM KYUNG / KIM SEONG LYONG et al. | Europäisches Patentamt | 2015

    Freier Zugriff

    Liquid Rocket Engine Testing

    Rahman, Shamim | NTRS | 2005


    Liquid Rocket Engine Testing

    S. Rahman | NTIS | 2005