The reconstruction of twist torque in the Main Parachute Risers of the Capsule Parachute Assembly System (CPAS) has been successfully used to validate CPAS Model Memo conservative twist torque equations. Reconstruction of basic, one degree of freedom drop tests was used to create a functional process for the evaluation of more complex, rigid body simulation. The roll, pitch, and yaw of the body, the fly-out angles of the parachutes, and the relative location of the parachutes to the body are inputs to the torque simulation. The data collected by the Inertial Measurement Unit (IMU) was used to calculate the true torque. The simulation then used photogrammetric and IMU data as inputs into the Model Memo equations. The results were then compared to the true torque results to validate the Model Memo equations. The Model Memo parameters were based off of steel risers and the parameters will need to be re-evaluated for different materials. Photogrammetric data was found to be more accurate than the inertial data in accounting for the relative rotation between payload and cluster. The Model Memo equations were generally a good match and when not matching were generally conservative.
Reconstruction of Twist Torque in Main Parachute Risers
AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar ; 2015 ; Daytona Beach, FL, United States
2015-03-30
Aufsatz (Konferenz)
Keine Angabe
Englisch
RECONSTRUCTION OF TWIST TORQUE IN MAIN PARACHUTE RISERS
British Library Conference Proceedings | 2015
|Reconstruction of Twist Torque in Main Parachute Risers
AIAA | 2015
|Apollo 15 main-parachute failure
NTRS | 1972
|NTRS | 1982
|