This report presents the results of wind-tunnel tests on eight C-class airship hulls with various fineness ratios, conducted in the Navy Aerodynamic Laboratory, Washington. The purpose of the tests was to determine the variation of resistance with fineness ratio, and also to find the pressure and friction elements of the total drag for the model having the least shape coefficient. Seven C-class airship hulls with fineness ratios of 1.0, 1.5, 2.0, 3.0, 6.0, 8.0, and 10.0 were made and verified. These models and also the previously constructed original C-class hull, whose fineness ratio is 4.62, were then tested in the 8 by 8 foot tunnel for drag of 0 degree pitch and yaw, at various wind speeds. The original hull, which was found to have the least shape coefficient, was then tested for pressure distribution over the surface at various wind speeds. (author)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Drag of C-Class Airship Hulls of Various Fineness Ratios


    Beteiligte:
    Zahm, A F (Autor:in) / Smith, R H (Autor:in) / Louden, F A (Autor:in)

    Erscheinungsdatum :

    1929-01-01


    Medientyp :

    Sonstige


    Format :

    Keine Angabe


    Sprache :

    Englisch



    Metalclad airship hulls

    PAVLECKA, V. | AIAA | 1977


    Stability equations for airship hulls

    Zahm, A. F. | TIBKAT | 1925



    Stability equations for airship hulls

    Zahm, A.F. | Engineering Index Backfile | 1925