In 2004 NASA began investigation of a robotic servicing mission for the Hubble Space Telescope (HST). Such a mission would require estimates of the HST attitude and rates in order to achieve a capture by the proposed Hubble robotic vehicle (HRV). HRV was to be equipped with vision-based sensors, capable of estimating the relative attitude between HST and HRV. The inertial HST attitude is derived from the measured relative attitude and the HRV computed inertial attitude. However, the relative rate between HST and HRV cannot be measured directly. Therefore, the HST rate with respect to inertial space is not known. Two approaches are developed to estimate the HST rates. Both methods utilize the measured relative attitude and the HRV inertial attitude and rates. First, a nonlinear estimator is developed. The nonlinear approach estimates the HST rate through an estimation of the inertial angular momentum. Second, a linearized approach is developed. The linearized approach is a pseudo-linear Kalman filter. Simulation test results for both methods are given. Even though the development began as an application for the HST robotic servicing mission, the methods presented are applicable to any rendezvous/capture mission involving a non-cooperative target spacecraft.
Hubble Space Telescope Angular Velocity Estimation During the Robotic Servicing Mission
2005
18 pages
Report
Keine Angabe
Englisch
Space Technology , Robotics/Robots , Tooling, Machinery, & Tools , Hubble space telescope , Robotics , Servicing missions , Computerized control systems , Velocity , Angular momentum , Robot control , Robot sensors , Gyroscopes , Pointing control systems , Space missions , Simulations , Spacecraft , NASA programs
Hubble Space Telescope Angular Velocity Estimation During the Robotic Servicing Mission
Online Contents | 2007
|