The design of truck bolster center plate rims was investigated as a result of increased reports of their failure on 100-ton capacity freight cars. The damage occurs when cars are coupled at moderate to high speeds, since the rapid deceleration of the truck causes high loads between the truck and body bolsters. Test measurements were made on an unloaded 100-ton hopper car impacting a string of loaded cars. The forces between the truck and body bolsters on the moving car were determined at impact speeds from 2.9 to 9.2 mph. Tests were made with two different energy absorbing capacities of draft gear. A finite-element stress analysis showed that loads of the magnitude measured on the test would case severe stresses in the center plate rim and that yielding of the material would be expected. Several potential modifications of the truck bolster center plate rim were analyzed which showed that significant improvements could be obtained by making the rim wider and by increasing the radius of the fillet at the inside of the rim.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Effects of Longitudinal Impact Forces on Freight Car Truck Bolsters


    Beteiligte:
    M. R. Johnson (Autor:in)

    Erscheinungsdatum :

    1974


    Format / Umfang :

    40 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Freight car and tender truck bolsters

    Chiles, G.S. / Kelley, R.G. | Engineering Index Backfile | 1918



    Truck mounted brake system for rod-under style bolsters

    PLEGGE RICHARD WAYNE / GREGAR PETER PAUL / KOZIOL MICHAEL | Europäisches Patentamt | 2020

    Freier Zugriff

    Truck mounted brake system for rod-under style bolsters

    PLEGGE RICHARD WAYNE / GREGAR PETER PAUL / KOZIOL MICHAEL | Europäisches Patentamt | 2019

    Freier Zugriff

    TRUCK MOUNTED BRAKE SYSTEM FOR ROD-UNDER STYLE BOLSTERS

    PLEGGE RICHARD WAYNE / GREGAR PETER PAUL / KOZIOL MICHAEL | Europäisches Patentamt | 2017

    Freier Zugriff