Finite element analyses have been performed for two full-scale crash tests of an MD-500 helicopter. The first crash test was conducted to evaluate the performance of a composite deployable energy absorber under combined flight loads. In the second crash test, the energy absorber was removed to establish the baseline loads. The use of an energy absorbing device reduced the impact acceleration levels by a factor of three. Accelerations and kinematic data collected from the crash tests were compared to analytical results. Details of the full-scale crash tests and development of the system-integrated finite element model are briefly described along with direct comparisons of acceleration magnitudes and durations for the first full-scale crash test. Because load levels were significantly different between tests, models developed for the purposes of predicting the overall system response with external energy absorbers were not adequate under more severe conditions seen in the second crash test. Relative error comparisons were inadequate to guide model calibration. A newly developed model calibration approach that includes uncertainty estimation, parameter sensitivity, impact shape orthogonality, and numerical optimization was used for the second full-scale crash test. The calibrated parameter set reduced 2-norm prediction error by 51% but did not improve impact shape orthogonality.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Comparison of Test and Finite Element Analysis for Two Full-Scale Helicopter Crash Tests


    Beteiligte:
    M. S. Annett (Autor:in) / L. G. Horta (Autor:in)

    Erscheinungsdatum :

    2011


    Format / Umfang :

    21 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Comparison of Test and Finite Element Analysis for Two Full-Scale Helicopter Crash Tests

    Annett, M. / Horta, L. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2011



    Finite Element Simulation of a Full-Scale Crash Test of a Composite Helicopter

    Jackson, K. E. / Fasanella, E. / Lyle, K. et al. | British Library Conference Proceedings | 2000


    Full-Scale Crash Test and Finite Element Simulation of a Composite Prototype Helicopter

    Jackson, Karen E. / Fasanella, Edwin L. / Boitnott, Richard L. et al. | NTRS | 2003