Flight service experience and in-service inspection results are reported for DC-10 graphite composite rudders during the third year of airline service. Test results and status are also reported for ground-based and airborne graphite-epoxy specimens with three different epoxy resin systems to obtain moisture absorption data. Twenty graphite composite rudders were produced, nine of which were installed on commercial aircraft during the past three years. The rudders collectively accumulated 75,863 flight hours. The high time rudder accumulated 12,740 flight hours in slightly over 36 months. The graphite composite rudders were inspected visually at approximately 1000 flight hour intervals and ultrasonically at approximately 3000 flight hour intervals in accordance with in-service inspection plans. All rudders were judged acceptable for continued service as a result of these inspections. Composite moisture absorption data on small specimens, both ground-based and carried aboard three flight-service aircraft, are given. The specimens include Thornel 300 fibers in Narmco 5208 and 5209 resin systems, and Type AS fibers in the Hercules 3501-6 resin system.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Flight-Service Program for Advanced Composite Rudders on Transport Aircraft


    Erscheinungsdatum :

    1979


    Format / Umfang :

    33 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch







    PODDED RUDDERS

    Junglewitz, A. / el Moctar, O. / Franic, S. et al. | British Library Conference Proceedings | 2004


    Unconventional Rudders

    Gokarn, R. P. | Springer Verlag | 2024