Introducing composite vessels into the Space Shuttle Program represented a significant technical achievement. Each Orbiter vehicle contains 24 (nominally) Kevlar tanks for storage of pressurized helium (for propulsion) and nitrogen (for life support). The use of composite cylinders saved 752 pounds per Orbiter vehicle compared with all-metal tanks. The weight savings is significant considering each Shuttle flight can deliver 54,000 pounds of payload to the International Space Station. In the wake of the Columbia accident and the ensuing Return to Flight activities, the Space Shuttle Program, in 2005, re-examined COPV hardware certification. Incorporating COPV data that had been generated over the last 30 years and recognizing differences between initial Shuttle Program requirements and current operation, a new failure mode was identified, as composite stress rupture was deemed credible. The Orbiter Project undertook a comprehensive investigation to quantify and mitigate this risk. First, the engineering team considered and later deemed as unfeasible the option to replace existing all flight tanks. Second, operational improvements to flight procedures were instituted to reduce the flight risk and the danger to personnel. Third, an Orbiter reliability model was developed to quantify flight risk. Laser profilometry inspection of several flight COPVs identified deep (up to 20 mil) depressions on the tank interior. A comprehensive analysis was performed and it confirmed that these observed depressions were far less than the criterion which was established as necessary to lead to liner buckling. Existing fleet vessels were exonerated from this failure mechanism. Because full validation of the Orbiter Reliability Model was not possible given limited hardware resources, an Accelerated Stress Rupture Test of a flown flight vessel was performed to provide increased confidence. A Bayesian statistical approach was developed to evaluate possible test results with respect to the model credibility and thus flight rationale for continued operation of the Space Shuttle with existing flight hardware. A non-destructive evaluation (NDE) technique utilizing Raman Spectroscopy was developed to directly measure the overwrap residual stress state. Preliminary results provide optimistic results that patterns of fluctuation in fiber elastic strains over the outside vessel surface could be directly correlated with increased fiber stress ratios and thus reduced reliability.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Composite Overwrapped Pressure Vessels (COPV): Developing Flight Rationale for the Space Shuttle Program


    Beteiligte:
    M. T. Kezirian (Autor:in)

    Erscheinungsdatum :

    2010


    Format / Umfang :

    74 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Composite Overwrapped Pressure Vessels (COPV): Flight Rationale for the Space Shuttle Program

    Kezirian, Michael T. / Johnson, Kevin L. / Phoenix, Stuart L. | NTRS | 2011



    Composite Overwrapped Pressure Vessels (COPV): Flight Rationale for the Space Shuttle Program

    Kezirian, Michael / Johnson, Kevin / Phoenix, Stuart | AIAA | 2011


    Composite Overwrapped Pressure Vessels (COPV): Flight Rationale for the Space Shuttle Program

    Kexirian, M. / Johnson, K. / Phoenix, S. et al. | British Library Conference Proceedings | 2011


    Composite Overwrapped Pressure Vessels (COPV)

    Lewis, J. / Woodmansee, P. / O'Donnell, T. | NTRS | 2002