Wind-tunnel tests of an aeroelastically designed helicopter rotor model were carried out to determine the effects on dynamic response and aerodynamic performance of varying the design of the outboard 8 percent of the blade lengths. Four different blade tip geometries or shapes having different amounts of planform sweep, thickness and chordwise taper, and anhedral angle were studied. Each configuration was tested at several shaft angles of attack for advance ratios of 0.20, 0.30, 0.35, and 0.40. For each combination of shaft angle and advance ratio, rotor lift was varied over a wide range to include high lift conditions.
Experimental Investigation of Effects of Blade Tip Geometry on Loads and Performance for an Articulated Rotor System
1979
79 pages
Report
Keine Angabe
Englisch
Articulated rotor systems with blade-to-blade damping
Europäisches Patentamt | 2020
|ARTICULATED ROTOR SYSTEMS WITH BLADE-TO-BLADE DAMPING
Europäisches Patentamt | 2020
|Articulated Rotor Systems with Blade-to-Blade Damping
Europäisches Patentamt | 2019
|