A separation system was designed for the X-38 experimental crew return vehicle program to allow the Deorbit Propulsion Stage (DPS) to separate from the X-38 lifting body during reentry operations. The configuration chosen was a spring-loaded plunger, known as the Bolt Retractor Subsystem (BRS), that retracts each of the six DPS-to-lifting body attachment bolts across the interface plane after being triggered by a separation nut mechanism. The system was designed to function on the ground in an atmospheric environment as well as in space. The BRS provides the same functionality as that of a completely pyrotechnic shear separation system that would normally be considered ideal for this application, but at a much lower cost. This system also could potentially be applied to future space station crew return vehicles. The design goal of 40 ms retraction time was successfully met in a series of demonstrations performed at the NASA Marshall Space Flight Center s Pyrotechnic Shock Facility (PSF) and Flight Robotics Laboratory (FRL). It must be emphasized that a full-scale test series was not performed on the BRS due to program schedule and cost constraints.
Design and Demonstration of Bolt Retractor Separation System for X-38 Deorbit Propulsion Stage
2003
8 pages
Report
Keine Angabe
Englisch
Design and Demonstration of Bolt Retractor Separation System for X-38 Deorbit Propulsion Stage
British Library Conference Proceedings | 2003
|X-38 Bolt Retractor Subsystem Separation Demonstration
NTIS | 2002
|X-38 Bolt Retractor Subsystem Separation Demonstration
NTRS | 2002
|Demonstration of a Pyrotechnic Bolt-Retractor System
NTRS | 2004
|