Current plans for constructing large structures in space entail fabricating the primary components, such as truss segments, on the ground and assembling them in space. This process requires an exorbitant number of support missions, and methods to minimize the number must be considered. Whenever the space shuttle is launched, its external tank is jettisoned and destroyed prior to reaching orbit. This aerospace grade aluminum structure can be carried into orbit and utilized extrusively. The Prototype Space Fabrication Platform (SFP) fabricates aluminum materials, reduced from external tanks, into functional trusses. The trusses are strong and can be used as the primary components for future structures in space. The fabrication process produces a continuous truss allowing the end user to determine the length. The SFP can fabricate the same amount of truss from one external tank as four dedicated shuttle missions can deliver in the cargo bay. The SFP utilizes electrodynamic propulsion, via shielded coils, for maneuvering. The novel propulsion system facilitates a versatile payload transportation and delivery capability. The SFP can continuously track a target from all directions. The tracking system is ideal for docking since plume impingement is not a concern. With the assistance of remote manipulators, the SFP can deliver a payload in a wide variety of orientations. Under most conditions, the remote manipulator and maneuvering commands originate from ground workstations. Required manned presence is greatly reduced, and the time when the space shuttle is off station is effectively utilized. The logistical complications, currently inhibiting advancement in space, can be eliminated. Space propulsion, Space manufacturing, Spacecraft docking, Electrodynamic p.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Prototype Space Fabrication Platform


    Beteiligte:
    J. A. Bessel (Autor:in) / J. M. Ceney (Autor:in) / D. M. Crean (Autor:in) / E. A. Ingham (Autor:in) / D. J. Pabst (Autor:in)

    Erscheinungsdatum :

    1993


    Format / Umfang :

    497 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Advanced Composite Materials in Space Structures (Design, Fabrication and Prototype Evaluation)

    Elomari, S. / Richards, H. / San Marchi, C. et al. | British Library Conference Proceedings | 1997


    Automatic wire harness fabrication system prototype

    Alander, J.T. / Autere, A. / Hakula, H. et al. | Tema Archiv | 1989


    Tracking control for a Stewart platform prototype

    Rossell Garriga, Josep Maria / Palacios Quiñonero, Francisco / Rubió Massegú, Josep et al. | BASE | 2015

    Freier Zugriff

    Ultralight Deployable Space Structure Prototype

    Gdoutos, Eleftherios / Truong, Alan / Pedivellano, Antonio et al. | AIAA | 2020