To determine shuttle orbiter wing loads during ascent, wing load instrumentation was added to Columbia (OV-102). This instrumentation included strain gages and pressure orifices on the wing. The loads derived from wing pressure measurements taken during STS 61-C did not agree with those derived from strain gage measurements or with the loads predicted from the aerodynamic database. Anomalies in the surface immediately surrounding the pressure orifices in the thermal protection system (TPS) tiles were one possible cause of errors in the loads derived from wing pressure measurements. These surface anomalies were caused by a ceramic filler material which was installed around the pressure tubing. The filler material allowed slight movement of the TPS tile and pressure tube as the airframe flexed and bent under aerodynamic loads during ascent and descent. Postflight inspection revealed that this filler material had protruded from or receeded beneath the surface, causing the orifice to lose its flushness. Flight tests were conducted at NASA Ames Research Center Dryden Flight Research Facility to determine the effects of any anomaly in surface flushness of the orifice installation on the measured pressures at Mach numbers between 0.6 and 1.4. An F-104 aircraft with a flight test fixture mounted beneath the fuselage was used for these flights. Surface flushness anomalies typical of those on the orbiter after flight (STA 61-C) were tested. Also, cases with excessive protrusion and recession of the filler material were tested. This report shows that the anomalies in STS 61-C orifice installations adversely affected the pressure measurements. But the magnitude of the affect was not great enough to account for the discrepancies with the strain gage measurements and the aerodynamic predictions.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    In-Flight Investigation of Shuttle Tile Pressure Orifice Installations


    Beteiligte:
    T. R. Moes (Autor:in) / R. R. Meyer (Autor:in)

    Erscheinungsdatum :

    1990


    Format / Umfang :

    38 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    In-flight investigation of shuttle tile pressure orifice installations

    Moes, Timothy R. / Meyer, Robert R., Jr. | NTRS | 1990


    Improved shuttle tile

    Online Contents | 1994



    Flight investigation of fuselage static-pressure-vent airspeed installations

    Scherrer, R. / Rodert, L.A. | Engineering Index Backfile | 1943