The Ames 12-Foot Pressure Tunnel was used to determine the effects of Reynolds number on the static longitudinal aerodynamic characteristics of an advanced, high-aspect-ratio, supercritical wing transport model equipped with a full span, leading edge slat and part span, double slotted, trailing edge flaps. The model had a wing span of 7.5 ft and was tested through a free stream Reynolds number range from 1.3 to 6.0 x 10 to 6th power per foot at a Mach number of 0.20. Prior to the Ames tests, an investigation was also conducted in the Langley 4 by 7 Meter Tunnel at a Reynolds number of 1.3 x 10 to 6th power per foot with the model mounted on an Ames strut support system and on the Langley sting support system to determine strut interference corrections. The data obtained from the Langley tests were also used to compare the aerodynamic charactertistics of the rather stiff, 7.5-ft-span steel wing model tested during this investigation and the larger, and rather flexible, 12-ft-span aluminum-wing model tested during a previous investigation. During the tests in both the Langley and Ames tunnels, the model was tested with six basic wing configurations: (1) cruise; (2) climb (slats only extended); (3) 15 deg take-off flaps; (4) 30 deg take-off flaps; (5) 45 deg landing flaps; and (6) 60 deg landing flaps.
Low-Speed Tests of a High-Aspect-Ratio, Supercritical-Wing Transport Model Equipped with a High-Lift Flap System in the Langley 4- by 7-Meter and Ames 12-Foot Pressure Tunnels
1983
277 pages
Report
Keine Angabe
Englisch
Aerodynamics , Aerodynamic characteristics , High aspect ratio , Leading edge slats , Low speed stability , Reynolds number , Slender wings , Supercritical wings , Trailing edge flaps , Transport aircraft , Wind tunnel tests , Wing profiles , Acee program , Angle of attack , Longitudinal stability , Struts