The magnetic properties of rare earth fillers (RE), e.g. Samarium Cobalt (SmCo), are remarkably high, if compared to ferrites. Nevertheless, they have very high magnetizing fields, which lead to poor orientability of the filler particles in the magnetic field during processing by injection molding. As a result, SmCo-filled polymers cannot be applied for the production of multi-polar magnets, because the multi-polar magnetic field in the mold is too low to orient the filler particles. This paper deals with the new method for the production of multi-polar SmCo magnets that integrates premagnetization of the filler in the hot runner system of the injection mold. The method developed separates the magnetizing process from the orienting process of the particles. First the magnetic compound is molten in the plastification unit of the injection molding machine. Then the molten compound is magnetized in the hot runner system by a very strong magnetic coil, and is finally injected into the cavity with its multi-pole field integrated. The procedure presented considerably enhances orientability. Also, the properties of multi-pole magnets improve significantly thanks to premagnetization.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Improvement of the filler orientability during injection molding of multi-polar SmCo-magnets by premagnetization


    Beteiligte:


    Erscheinungsdatum :

    2012-10-01


    Format / Umfang :

    764674 byte




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Shape Orientability

    Žunić, Joviša / Rosin, Paul L. / Kopanja, Lazar | Springer Verlag | 2006


    Shape Orientability

    Zunic, J. / Rosin, P. L. / Kopanja, L. | British Library Conference Proceedings | 2006


    Expansion molding method of fuel filler neck injection port

    KIM YOUNG CHEOL / DO YOUNG JAE / YANG JUN WOO et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    Multi-layer Sandwich Injection Molding Process

    Kitamura, T. / Takahashi, T. | British Library Online Contents | 1997


    Injection Molding

    Haaxma, H. | SAE Technical Papers | 1967