A 1:25-scale model of the Tioga outlet works was used to determine the adequacy of the stilling basin to perform as desired for discharges up to 15,860 cfs, to study flow conditions in the exit channel, and to determine minimum riprap requirements for the exit channel. A schematic of the intake tower, the outlet conduit, the stilling basin, and about 600 ft of the exit channel were reproduced in the model. The original design stilling basin performed satisfactorily for discharges ranging from 2,000 to 14,000 cfs; however, flow separation and adverse vortex action occurred with lesser flows and a pulsating jump that overtopped the basin walls occurred with greater flows. Performance with low release rates was determined for both single- and double-gate operations. Recommended changes to the original design stilling basin included widening the basin from 55.5 to 72 ft, decreasing the flare of the outlet transition from 1 on 4.683 to 1 on 6, raising the basin apron 4.5 ft from el 1005.5 to 1010.0, raising the elevation of the sidewalls from 1043.0 to 1048.0, and lengthening the basin approximately 30 ft to the 38.64-ft-long horizontal floor at the outlet portal. The minimum size riprap required for stability in the exit channel was determined with the design discharge of 15,860 cfs.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Tioga Outlet Works, Tioga and Hammond Lakes, Susquehanna River Basin, Pennsylvania: Hydraulic Model Investigation



    Erschienen in:

    Erscheinungsdatum :

    1976


    Format / Umfang :

    3274970


    Medientyp :

    Report


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :


    Connecting Channel for Tioga and Hammond Lakes, Tioga River and Crooked Creek, Pennsylvania: Hydraulic Model Investigation

    Oswalt, Noel R. / Pickering, Glenn A. | HENRY – Bundesanstalt für Wasserbau (BAW) | 1976

    Freier Zugriff

    Effects of Flood Flows on Water Quality of Tioga-Hammond Lakes : Hydraulic Model Investigation

    Dortch, Mark S. | HENRY – Bundesanstalt für Wasserbau (BAW) | 1976

    Freier Zugriff

    Outlet Works for Beltzville Dam, Pohopoco Creek, Pennsylvania: Hydraulic Model Investigation

    Melsheimer, Edwin S. | HENRY – Bundesanstalt für Wasserbau (BAW) | 1969

    Freier Zugriff

    Outlet Works for New Hope Reservoir, Cape Fear River Basin, North Carolina: Hydraulic Model Investigation

    Melsheimer, Edwin S. / Oswalt, Noel R. | HENRY – Bundesanstalt für Wasserbau (BAW) | 1969

    Freier Zugriff

    Spillway and Outlet Works, Tocks Island Dam, Delaware River, Pennsylvania, New Jersey, and New York: Hydraulic Model Investigation

    Melsheimer, Edwin S. | HENRY – Bundesanstalt für Wasserbau (BAW) | 1970

    Freier Zugriff