A stall model to predict the performance of a blade row operating under rotating stall conditions, is proposed.

    Design/methodology/approach

    The experiments were carried out on an isolated rotor row of an axial flow compressor of a radius ratio of 0.66 hub/tip. Wall static pressure tappings were used for measurement of blade row pressure rise. The mass flow rate through the machine was determined from the pressure drop at the intake. Detailed flow measurements were made using a hot wire “V” probe and transducers. An online data acquisition system was used in which data sampling was phase-locked with respect to stall cell trailing edge.

    Findings

    Measurements indicate that a pressure depression occurs in the stalled region. The assumption of uniform static pressure at the exit of a stalled blade row is not supported by the present work. The assumption of uniform static pressure at the exit of a stalled row together with the assumption that flow in unstalled regions operates at fixed point on the unstalled characteristic leads to the conclusion that total-to-static pressure rise during stalled operation is independent of blockage. This view is not supported by the experiments carried out on an isolated rotor.

    Research limitations/implications

    Additional experimental studies for axial compressors having different rotor and blade geometries and rotor speeds, are required.

    Practical implications

    The results can be used in the design and operation of axial compressor rotors.

    Originality/value

    A new stall model is presented in which the behavior during stalled operation with large blockage is different from that during, low blockage.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A model governing the stall characteristics of an isolated axial compressor rotor


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2005-04-01


    Format / Umfang :

    6 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Axial Compressor Rotor Flow Structure at Stall-Inception

    Davis, Roger / Yao, Jixian | AIAA | 2006


    Dynamic pressure response with stall on axial flow compressor rotor blades

    COUSINS, W. / OBRIEN, JR., W. / SEXTON, M. | AIAA | 1981


    AIAA 2006-0419 Axial Compressor Rotor Flow Structure at Stall-Inception

    Davis, R. L. / Yao, J. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2006


    EFFECT OF CIRCUMFERENTIAL GROOVES AND TIP RECESS ON STALL CHARACTERISTICS OF TRANSONIC AXIAL COMPRESSOR ROTOR

    Khan, J. / Parvez, K. / Ahmad, S. et al. | British Library Conference Proceedings | 2011