Abstract Obtaining rock samples by drilling is an important method of asteroid detection. Due to the strict restrictions on the weight, volume, and weight on bit, conventional drilling devices are difficult to meet the requirements of drilling on an asteroid that has a weak gravitational field. This article proposed a rotary-percussive ultrasonic drill using a bonded-type piezoelectric actuator that can output harmonic vibration and elliptical trajectories simultaneously. The configuration and operation principle of the RPUD is presented and analyzed. Mode shape of the actuator and motions of the driving tips are verified by modal analysis and transient analysis, separately. Ultimately, a prototype of the RPUD is fabricated and experimentally investigated for its output characteristic and drilling performance. The test results indicate that the developed actuator can achieve the maximum no-load rotary speed of 119.2 r/min when the excitation frequency is 17.79 kHz. Furthermore, the maximum torque is 35 mNm, and the corresponding driving speed is about 20 r/min. The maximum drilling rate of the prototype to the sandstone is 7 mm per minute under a weight on bit of 5 N. The experimental results confirm that the proposed RPUD is feasible to drill rocks under a low weight on bit, which has the potential to obtain rock samples on an asteroid.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a rotary-percussive ultrasonic drill using a bolt-clamped type piezoelectric actuator


    Beteiligte:
    Bai, Deen (Autor:in) / Li, Yuntao (Autor:in) / Quan, Qiquan (Autor:in) / Tang, Dewei (Autor:in) / Deng, Zongquan (Autor:in)

    Erschienen in:

    Advances in Space Research ; 71 , 12 ; 5360-5368


    Erscheinungsdatum :

    2023-02-05


    Format / Umfang :

    9 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Rotary-Percussive Deep Drill for Planetary Applications

    Paulsen, G. / Zacny, K. / McKay, C. et al. | British Library Conference Proceedings | 2010


    A Rotary-Percussive Coring Drill for Lunar Exploration

    Quan, Q. / Tang, D. / Jiang, S. et al. | British Library Conference Proceedings | 2012


    Research on a Rotary-Percussive Coring Drill for Lunar Exploration

    Li, S. / Quan, Q. / Tang, De-Wei et al. | Tema Archiv | 2012



    Rotary-percussive drilling engine

    Pixton, D.S. | Tema Archiv | 1998