Abstract Today’s space debris environment shows major concentrations of objects within distinct orbital regions for nearly all size regimes. The most critical region is found at orbital altitudes near 800km with high declinations. Within this region many satellites are operated in so called sun-synchronous orbits (SSO). Among those, there are Earth observation, communication and weather satellites. Due to the orbital geometry in SSO, head-on encounters with relative velocities of about 15km/s are most probable and would thus result in highly energetic collisions, which are often referred to as catastrophic collisions, leading to the complete fragmentation of the participating objects. So called feedback collisions can then be triggered by the newly generated fragments, thus leading to a further population increase in the affected orbital region. This effect is known as the Kessler syndrome. Current studies show that catastrophic collisions are not a major problem today, but will become the main process for debris generation within the SSO region in the near future, even without any further launches. In order to avoid this effect, objects with a major impact on collisional cascading have to be actively removed from the critical region after their end of life. Not having the capability to perform an end-of-life maneuver in order to transfer to a graveyard orbit or to de-orbit, many satellites and rocket bodies would have to be de-orbited within a dedicated mission. In such a mission, a service satellite would perform a de-orbit maneuver, after having docked to a specific target. In this paper, chemical and electric propulsion systems were analysed with the main focus on removing multiple targets within one single mission. The targets were chosen from a previously defined priority list in order to enhance the mission efficiency. Total mission time, Δ V and system mass were identified as key parameters to allow for an evaluation of the different concepts. It was shown that it is possible to remove up to five high priority targets per year using a chemical propulsion system, however, missions may result in too high Δ V and/or mission duration depending on the orbital distribution of the targets. When using an electric propulsion system, the required fuel mass is significantly reduced when compared to the chemical propulsion system, but it was shown that mission duration strongly depends on the mass of the selected targets. More powerful engines as well as out-of-plane thrust are thus required to achieve the defined mission goals.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Active debris removal of multiple priority targets


    Beteiligte:
    Braun, Vitali (Autor:in) / Lüpken, A. (Autor:in) / Flegel, S. (Autor:in) / Gelhaus, J. (Autor:in) / Möckel, M. (Autor:in) / Kebschull, C. (Autor:in) / Wiedemann, C. (Autor:in) / Vörsmann, P. (Autor:in)

    Erschienen in:

    Advances in Space Research ; 51 , 9 ; 1638-1648


    Erscheinungsdatum :

    2012-12-04


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Active debris removal of multiple priority targets

    Braun, Vitali | Online Contents | 2013



    Optimization of Active Debris Removal Missions with Multiple Targets

    Shen, Hong-Xin / Zhang, Tian-Jiao / Casalino, Lorenzo et al. | AIAA | 2017


    Active Debris Removal Missions with Multiple Targets (AIAA 2014-4226)

    Casalino, L. / Pastrone, D. / American Institute of Aeronautics and Astronautics; American Astronautical Society | British Library Conference Proceedings | 2014