AbstractThis study focuses on the numerical simulation of supersonic flows around a missile with lattice wings. In order to reduce the computational cost for such a configuration, the actuator disc concept is chosen to model the effects of grid fins. This approach is coupled with a Navier–Stokes solver in order to predict the forces and moments on a complete vehicle. The method consists in replacing the lattice controls by artificial boundary conditions where the forces involved by the grid fins are applied. These forces are interpolated from an experimental database. Numerical simulations are performed for laminar and turbulent flows for several Mach numbers and angles of attack. The results are compared to experimental data in order to validate the method. The comparisons reveal some discrepancies which are mainly due to the turbulence effects and to the database from which the forces resulting from the lattice wings are interpolated. The method allows the prediction of the forces applied on the vehicle and therefore an estimate of its aerodynamic performances. The computations validate the approach and show its potential as a tool for vehicle design.

    ZusammenfassungDie vorliegende Untersuchung behandelt die numerische Simulation für die Überschallströmung um einen Flugkörper mit Gitterflügeln. Die aerodynamischen Einflüsse der Gitterflügel werden mit Hilfe von Wirkscheiben modelliert. Damit kann die Rechenzeit für die Strömungsberechnung wesentlich reduziert werden. Das Wirkscheibenkonzept ist in einen Navier–Stokes-Löser integriert worden, um Kräfte und Momente der kompletten Konfiguration vorherzusagen. Dabei werden die Gitterleitwerke mit künstlichen Randbedingungen ersetzt, auf denen die spezifischen Kräfte des Gitterflügels wirken. Diese Kräfte werden von einer experimentellen Datenbank interpoliert. Es werden numerische Simulationen für laminare und turbulente Strömungen bei verschiedenen Machzahlen und Anstellwinkeln durchgeführt. Die Ergebnisse werden mit experimentellen Daten verglichen, um das Verfahren zu validieren. Diese Vergleiche zeigen einige Unterschiede auf, die wesentlich auf den Einfluss der Turbulenz und die derzeit vorliegende Datenbasis zur Interpolation der lokalen Kräfte der Gitterflügel zurückgeführt werden können. Die Methode erlaubt die Vorhersage der Kräfte des Fahrzeugs und daher auch Aussagen über die aerodynamische Leistungsfähigkeit. Die Berechnungen validieren den Verfahrensansatz und zeigen das Potential für seine Nutzung als Entwurfswerkzeug auf.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Flow predictions around a missile with lattice wings using the actuator disc concept


    Beteiligte:
    Reynier, Philippe (Autor:in) / Reisch, Uwe (Autor:in) / Longo, José-Maria (Autor:in) / Radespiel, Rolf (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2004-03-08


    Format / Umfang :

    12 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Novel Locally Swept Lattice Wings for Missile Control at High Speeds

    Guyot, Daniel / Schülein, Erich | AIAA | 2007


    ICAS2014_0622: SIMULATION OF FLOW AROUND FUSELAGE OF HELICOPTER USING ACTUATOR DISC THEORY

    Batrakov, A. S. / Kusyumov, A. N. / Barakos, G. | British Library Conference Proceedings | 2014


    Numerical Study of Hypersonic Missiles with Lattice Wings Using an Actuator Disk

    Reynier, Philippe / Reisch, Uwe / Longo, Jose et al. | AIAA | 2002


    Novel Locally Swept Lattice Wings for Missile Control at High Speeds AIAA Paper

    Guyot, D. / Schulein, E. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2007


    Steady subsonic flow around finite-thickness wings

    Kuo, Ching-Chiang / Morino, Luigi | TIBKAT | 1975