Abstract 3D-printing technologies are receiving an always increasing attention in architecture, due to their potential use for direct construction of buildings and other complex structures, also of considerable dimensions, with virtually any shape. Some of these technologies rely on an agglomeration process of inert materials, e.g. sand, through a special binding liquid and this capability is of interest for the space community for its potential application to space exploration. In fact, it opens the possibility for exploiting in-situ resources for the construction of buildings in harsh spatial environments. The paper presents the results of a study aimed at assessing the concept of 3D printing technology for building habitats on the Moon using lunar soil, also called regolith. A particular patented 3D-printing technology – D-shape – has been applied, which is, among the existing rapid prototyping systems, the closest to achieving full scale construction of buildings and the physical and chemical characteristics of lunar regolith and terrestrial regolith simulants have been assessed with respect to the working principles of such technology. A novel lunar regolith simulant has also been developed, which almost exactly reproduces the characteristics of the JSC-1A simulant produced in the US. Moreover, tests in air and in vacuum have been performed to demonstrate the occurrence of the reticulation reaction with the regolith simulant. The vacuum tests also showed that evaporation or freezing of the binding liquid can be prevented through a proper injection method. The general requirements of a Moon outpost have been specified, and a preliminary design of the habitat has been developed. Based on such design, a section of the outpost wall has been selected and manufactured at full scale using the D-shape printer and regolith simulant. Test pieces have also been manufactured and their mechanical properties have been assessed.

    Highlights Design of a suitable outpost for colonisation of the Moon. Selection of a proper simulant of the Moon soil for construction of building blocks, to test the technology. Description of the 3D printing technology named D-shaped for building the blocks. Experimental demonstration of the applicability of the D-shape technology.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Building components for an outpost on the Lunar soil by means of a novel 3D printing technology


    Beteiligte:

    Erschienen in:

    Acta Astronautica ; 93 ; 430-450


    Erscheinungsdatum :

    2013-07-21


    Format / Umfang :

    21 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    First lunar outpost

    Andino, Aureo F. / Silva, Daniel / Ortiz, Nelson et al. | NTRS | 1992


    Lunar outpost

    Springer Verlag | 2009


    First Lunar Outpost

    A. F. Andino / D. Silva / N. Ortiz et al. | NTIS | 1992


    The last lunar outpost

    Day, Dwayne | Online Contents | 2004