Abstract Deicing composite laminates often undergo functional and structural fatigue during long-term electro-thermal deicing process, posing a potential threat to their safe service. The article conducted the internal thermal and compression fatigue tests studies on deicing composite laminates embedding sprayable metal circuit. The internal thermal fatigue test refers to the specimen being subjected to 1000 cycles of temperature from -55 °C to 80 °C and then back to -55 °C. The compression fatigue test refers to the specimen being subjected to 30,000 cyclic loads and 4 static compressive loads. The results indicate that the deterioration of the electro-thermal function of the specimen precedes the damage of the structure. After 1000 thermal cycles, the electrical resistance has been increased by 20.46%, and heating power has been reduced by 17.02%. The compression fatigue effect of low load has a relatively small impact on the increase of resistance value, but the resistance value cannot be restored to its initial state. The compressive residual strength of the specimen after 30,000 compression cycles is about 50 MPa. The fatigue life of the structure was lower than that of the electro-thermal function.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Electro-thermal functional fatigue properties of deicing composite laminates: Internal thermal and compression cycle tests


    Beteiligte:
    Wu, Tingyang (Autor:in) / Zhou, Guangming (Autor:in) / Cai, Deng'an (Autor:in) / Mao, Dongsheng (Autor:in)


    Erscheinungsdatum :

    2024-02-09




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    COMBINED ELECTRO-THERMAL AND PNEUMATIC BOOT DEICING SYSTEM

    CHAUDHRY ZAFFIR A / ZHAO WENPING / BOTURA GALDEMIR CEZAR et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    COMBINED ELECTRO-THERMAL AND PNEUMATIC BOOT DEICING SYSTEM

    CHAUDHRY ZAFFIR A / ZHAO WENPING / BOTURA GALDEMIR CEZAR et al. | Europäisches Patentamt | 2018

    Freier Zugriff

    Electro-impulse deicing

    Kodet, A.C. | Tema Archiv | 1988


    Thermal deicing of polymer composite helicopter blades

    Dutta, Piyush K. / Ryerson, Charles C. / Pergantis, Charles | Tema Archiv | 2005


    Static compression and compression-compression fatigue properties of plain woven composite laminates

    ZHANG Tiechun / YANG Chenchen / WANG Xuan et al. | DOAJ | 2022

    Freier Zugriff