Abstract Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laser-induced flame nuclei were recorded. The results show that at the airflow velocity of 300–400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 μs, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 μs to 56 μs＀ Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors.

    Highlights Laser ignition is carried out in a highly complex engine environment with high pressure and non-premixed flow field. The higher the chamber pressure is, the faster the pressure rises during ignition. In order to avoid deflagration, the shear layer is more suitable for ignition. The trend of flame kernel development rate increases with the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Research on laser induced plasma ignition of gas oxygen/methane


    Beteiligte:
    Zhu, Shaohua (Autor:in) / Huang, Yuxiang (Autor:in) / Li, Lingyu (Autor:in) / Wei, Xianggeng (Autor:in) / Liu, Bing (Autor:in)

    Erschienen in:

    Acta Astronautica ; 217 ; 208-220


    Erscheinungsdatum :

    2024-01-10


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Laser induced spark ignition of methane-oxygen mixtures

    LEE, T. / SANTAVICCA, D. | AIAA | 1991


    Experimental Study of Low Frequency Plasma for Liquid Oxygen and Methane Ignition

    Nagata, Taiichi / Torres, Jose / Culbertson, John et al. | AIAA | 2012



    Advantage of Using Oxygen as Plasma Jet Feedstock for Methane/Air Ignition

    Kiyotaka Shuzenji / Takeshi Tachibana | AIAA | 2005


    LASER INDUCED SPARK IGNITION OF LAMINAR PREMIXED METHANE AIR JETS

    Jo, Seunghyun / Gore, Jay P. | TIBKAT | 2021