HighlightsA hardware-in-the-loop system to assess connected and autonomous vehicle applications.Integration of VISSIM traffic simulator with powertrain research platform.Middleware through internet network built with COM and socket programming.Accurate tracking of target vehicle speed and engine operating points.Actual fuel consumption and emissions recorded for simple and complex traffic scenarios.

    AbstractConnected vehicle environment provides the groundwork of future road transportation. Researches in this area are gaining a lot of attention to improve not only traffic mobility and safety, but also vehicles’ fuel consumption and emissions. Energy optimization methods that combine traffic information are proposed, but actual testing in the field proves to be rather challenging largely due to safety and technical issues. In light of this, a Hardware-in-the-Loop-System (HiLS) testbed to evaluate the performance of connected vehicle applications is proposed. A laboratory powertrain research platform, which consists of a real engine, an engine-loading device (hydrostatic dynamometer) and a virtual powertrain model to represent a vehicle, is connected remotely to a microscopic traffic simulator (VISSIM). Vehicle dynamics and road conditions of a target vehicle in the VISSIM simulation are transmitted to the powertrain research platform through the internet, where the power demand can then be calculated. The engine then operates through an engine optimization procedure to minimize fuel consumption, while the dynamometer tracks the desired engine load based on the target vehicle information. Test results show fast data transfer at every 200 ms and good tracking of the optimized engine operating points and the desired vehicle speed. Actual fuel and emissions measurements, which otherwise could not be calculated precisely by fuel and emission maps in simulations, are achieved by the testbed. In addition, VISSIM simulation can be implemented remotely while connected to the powertrain research platform through the internet, allowing easy access to the laboratory setup.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Hardware-in-the-loop testbed for evaluating connected vehicle applications


    Beteiligte:


    Erscheinungsdatum :

    2017-02-26


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Development of Hardware-in-the-Loop Testbed for Evaluating Truck Safety Systems

    Donoughe, Kelly / Rakha, Hesham / Swanson, Wayne et al. | Transportation Research Record | 2011



    The CAT Vehicle Testbed: A Simulator with Hardware in the Loop for Autonomous Vehicle Applications

    Rahul Kumar Bhadani / Jonathan Sprinkle / Matthew Bunting | DOAJ | 2018

    Freier Zugriff