Bracket towing hook construction planning is to make a construction that has the stress level of the allowable limit and can be accepted by the construction. Requirements for towing hook are structural strength if the stress levels that occur below the elastic region. By calculating the value of the maximum load, maximum stress, von mises stress and deflection (displasment) that occur in the construction of bracket towing hook, so that known security level of construction that has been designed.

    Research on construction of the strength bracket towing hook need to be considered and carried out, where the stress caused by load about them should not exceed the maximum limit σyield materials and σallow based on the rules from the class. The reference to rules used in this research is based on the rules of Bureau Classification Indonesia.

    Analysis of the strength bracket towing hook construction is done by using finite element methode. The analysis used is a static load analysis to determine the characteristics and location of greatest stress on the construction bracket towing hook based on three variations of loading.

    Analysis results obtained using finite element methode based program of greatest stress maximum occurs in the condition of the bracket towing hook  with maximum horse power load that is equal to 44,2 N/mm2 where the most critical area occurs at node 457 which is located at frame number 23 lengthwise section and stiffener number 7 cross section. This stress is still in a safe condition because after compared with material σyield of 400 N/mm2 and σallow based BKI rules of 178,12 N/mm2 produce safety factor value of 9,05 and 4,03


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    ANALISA KEKUATAN KONSTRUKSI BRACKET TOWING HOOK PADA TB. BONTANG DENGAN METODE ELEMEN HINGGA DAN RULES BKI


    Beteiligte:


    Erscheinungsdatum :

    2013



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    ANALISA KEKUATAN KONSTRUKSI CAR DECK PADA KAPAL KM. DHARMA FERRY 3 DENGAN METODE ELEMEN HINGGA

    Imam Pujo Mulyatno / Anggriawan Pratama | DOAJ | 2012

    Freier Zugriff


    ANALISA KEKUATAN KONSTRUKSI INTERNAL RAMP SISTEM STEEL WIRE ROPE PADA KM. DHARMA KENCANA VIII DENGAN METODE ELEMEN HINGGA

    Imam Pujo Mulyatno / Andi Trimulyono / Samuel Febriary Khristyson | DOAJ | 2014

    Freier Zugriff

    Analisis Kekuatan Konstruksi Graving Dock Gate Menggunakan Metode Elemen Hingga

    Kharis Abdullah / Budie Santosa | DOAJ | 2019

    Freier Zugriff