The subject of study in this article is the repair method of the aircraft (A/C) components made of polymer composite materials (PCM) with operational damage. This article improves the repair method of the A/C PCM components with cracks and holes. Objectives: to improve the repair method of operational damage of the A/C PCM components by layer-by-layer removal of the defective area using a milling tool; propose dependencies to determine the serviceability period of the damaged area, considering the safety factor and geometric parameters of the defect. The following methods are used: analysis of existing and common repair methods of the A/C PCM components, mathematical approaches for their evaluation based on solving systems of equations. According to the analysis, the shortcomings of existing and common repair methods of the A/C PCM components with cracks and holes are identified. A proposal is made to improve the adhesive repair method of the A/C PCM components by using a milling tool with a curved cutting edge with a radius of curvature from 3 mm to 5 mm. The main stages of such repair are updated by filling the repair area with isotropic polymer paste. The dependencies of the geometrical parameters of layer-by-layer milling on the strength of the A/C PCM components are shown, considering the operating loads, calculated loads, and safety factors. The scientific novelties of the obtained results are as follows: the repair method of the A/C PCM components with operational damage using layer-by-layer milling with shaped radial mill to remove PCM layers in the defective area followed by filling the repair area with isotropic polymer paste is improved; the dependencies of geometric and strength parameters of the defective area of the A/C PCM components are established, which allow to easily determine the time of defect development before the destruction of the structure and the temporary period of serviceability of the A/C PCM components. The proposed improvement of the repair method will increase the period of operation of the A/C PCM components in general, which may be the next study.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Improvement of the repair method of the aircraft components made of polymer composite materials with operational damage


    Beteiligte:
    Oleksii Andrieiev (Autor:in) / Kateryna Maiorova (Autor:in) / Borys Lupkin (Autor:in) / Maksym Boiko (Autor:in) / Yurii Korolkov (Autor:in)


    Erscheinungsdatum :

    2022




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    Bonded Composite Repair of Aircraft Battle Damage

    Bartholomeusz, R. / Baker, A. / Benfer, M. et al. | British Library Conference Proceedings | 1995


    Crash Simulation of Automotive Components made of Polymer Composite Materials

    Miravete, A. / Larrode, E. / Castejon, L. | British Library Conference Proceedings | 1996


    Crash simulation of automotive components made of polymer composite materials

    Miravete,A. / Larrode,E. / Castejon,L. et al. | Kraftfahrwesen | 1996


    Damage repair technology for composite materials

    Daugherty, R. L. / Pipes, R. B. | NTRS | 1977


    Crash Simulation of Automotive Components made of Polymer Composite Materials

    Miravete, A. / Larrode, E. / Castejon, L. | British Library Conference Proceedings | 1996